Any one with raceing seats in there cars?
Thread Starter
Full Member
Joined: Mar 2001
Posts: 84
Likes: 0
From: Ga.
Any one with raceing seats in there cars?
I am getting really close to getting some seats and was wondering if anyone and some interior shots with raceing seats in there 3rd gens and your opinion on fitmet. I like carabue and sparco any one fit better that the other. thanks
Full Member
Joined: Jan 2002
Posts: 170
Likes: 0
From: Winnipeg,Canada
A really good site to look at is www.demon-tweeks.co.uk last time I looked they had seat dimensions. hope this helps.
Senior Member
Joined: Mar 2001
Posts: 567
Likes: 0
From: Chicago, IL
Originally posted by dannyB
Anyone know if RECARO SRD's will fit in an FD?
Anyone know if RECARO SRD's will fit in an FD?
***Moderator***
Joined: Feb 2001
Posts: 2,413
Likes: 0
From: Chicago
Originally posted by stevecod
i'm sure the RECARO SRD's won't fit a FD because i have the RECARO bucket seat in my FD and that barely fits perfect and the sholders on the SRDs are 2" wider than my buckets. i had the sparco evo buckets before and the sholders are 1 1/2" wilder than my RECARO buckets.i'll post pictures.
i'm sure the RECARO SRD's won't fit a FD because i have the RECARO bucket seat in my FD and that barely fits perfect and the sholders on the SRDs are 2" wider than my buckets. i had the sparco evo buckets before and the sholders are 1 1/2" wilder than my RECARO buckets.i'll post pictures.
Trending Topics
OG
Joined: Feb 2001
Posts: 1,291
Likes: 1
From: Pleasanton,California
Originally posted by xtrme7
Thanks for all of the responses. Johnny how much taller are thoes seats than the factory and how did you mount them? Thans again
Thanks for all of the responses. Johnny how much taller are thoes seats than the factory and how did you mount them? Thans again
***Moderator***
Joined: Feb 2001
Posts: 2,413
Likes: 0
From: Chicago
Originally posted by Johnny
Height gain (if any) was small...maybe 1/4-1/2 inch because the seat are less padded then stock. I used the OEM sliders (because no one make brackets for the FD) and a couple aluminum bars to attach the seat to the oem sliders.. www.jayspec7.com used to have some directions because I gave him pointers and he did a write up on his webpage..
Height gain (if any) was small...maybe 1/4-1/2 inch because the seat are less padded then stock. I used the OEM sliders (because no one make brackets for the FD) and a couple aluminum bars to attach the seat to the oem sliders.. www.jayspec7.com used to have some directions because I gave him pointers and he did a write up on his webpage..
Seat sites...
Senior Member
Joined: Nov 2001
Posts: 508
Likes: 0
From: Manassas, VA
Originally posted by Johnny
Height gain (if any) was small...maybe 1/4-1/2 inch because the seat are less padded then stock. I used the OEM sliders (because no one make brackets for the FD) and a couple aluminum bars to attach the seat to the oem sliders.. www.jayspec7.com used to have some directions because I gave him pointers and he did a write up on his webpage..
Height gain (if any) was small...maybe 1/4-1/2 inch because the seat are less padded then stock. I used the OEM sliders (because no one make brackets for the FD) and a couple aluminum bars to attach the seat to the oem sliders.. www.jayspec7.com used to have some directions because I gave him pointers and he did a write up on his webpage..
The Cursed FD
Joined: Nov 2001
Posts: 914
Likes: 0
From: CA
Yeah I got that email also. Looks like a pretty cool site. You guys should check it out. www.horsepowerfreaks.com
OG
Joined: Feb 2001
Posts: 1,291
Likes: 1
From: Pleasanton,California
Originally posted by RedFD
I dont know if everyone got the email or not but someone opened up a site called www.horsepowerfreaks.com. In the site he has some sparco seats and brackets. I asked him specifically if they would fit our car... and he told me they were a direct fit(dont know if its true or not).
I dont know if everyone got the email or not but someone opened up a site called www.horsepowerfreaks.com. In the site he has some sparco seats and brackets. I asked him specifically if they would fit our car... and he told me they were a direct fit(dont know if its true or not).
There are brackets...generic...but I want bolt in....
Photo Diety
Joined: Mar 2001
Posts: 2,311
Likes: 0
From: Florida
I've had a long relationship with Corbeau over the years (as a customer) and I believe they were working on FD-specific brackets several months ago. It may be worth the effort to ring them up and find out if the brackets are complete. I used a pair of GT9CS seats (no longer made) which are quite large, mated to aluminum brackets. I used the Corbeau sliders and fabbed everything else up myself. Wasn't too hard really....As soon as the car is out of the shop, the seats will go in and I'll take a few images for people to see. BTW..had them recovered in Ultrasuede (looks/feels just like real suede, great wear characteristics and VERY easy to clean) which is grippy like the material used in the R1-specific seats.
Michel
Michel
Thread
Thread Starter
Forum
Replies
Last Post
