1999 jspec FD front end conversion
#1
Junior Member
Thread Starter
Join Date: May 2003
Location: San Francisco
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
1999 jspec FD front end conversion
hey guys i need some advice.
i really want to get the 99 jspec turnsignals. but really 1500 is a bit too deep in my opinion.
can i buy a replica front bumper, like cwest, feed mazdaspeed with the 99 signals cutout and that is fitted for 93 models.
and then just buy the turn signals seperate?
will they bolt right on? what kinda moddin?
and one more thing, stock 99jdm signals and the feed 99 signals. what are the diferences??
thanks ahead
i really want to get the 99 jspec turnsignals. but really 1500 is a bit too deep in my opinion.
can i buy a replica front bumper, like cwest, feed mazdaspeed with the 99 signals cutout and that is fitted for 93 models.
and then just buy the turn signals seperate?
will they bolt right on? what kinda moddin?
and one more thing, stock 99jdm signals and the feed 99 signals. what are the diferences??
thanks ahead
#3
Senior Member
Join Date: Dec 2001
Location: Somewhere in California
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1999 jspec FD front end conversion
Originally posted by nashfinn
and one more thing, stock 99jdm signals and the feed 99 signals. what are the diferences??
and one more thing, stock 99jdm signals and the feed 99 signals. what are the diferences??
To me though the 99 turn signal and FEED HID assembly look the same in shape.
#4
Recovering Milkaholic
iTrader: (7)
There is a group buy going on at nopistons right now for the whole 99 OEM conversion including the fog lamps for $800..
http://www.nopistons.com/forums/inde...showtopic=8634
http://www.nopistons.com/forums/inde...showtopic=8634
#5
The light bothers me.
Join Date: Oct 2002
Location: Manassas, VA, U.S.A
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
Jason only has 2 bumpers left, yellow and white and the 99 spec turn lamps are out of stock. Sucks cause I want this conversion too. Guess I'll have to wait a while longer....
Trending Topics
#8
Senior Member
Join Date: Jul 2002
Location: Quincy MA
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: 1999 jspec FD front end conversion
Those Feed turn signals are made for the FEED 2R bumper (that is a little different from the FEED 2 bumper that fits the 99 spec turn signals) which are a little bigger than the 99 spec turn signals..
Originally posted by ludeowner
FEED has a HID option for the city light assembly. I had asked Chuck from Rotary Extreme about it and he said that the FEED HIDs only fit into the FEED bumper.
To me though the 99 turn signal and FEED HID assembly look the same in shape.
FEED has a HID option for the city light assembly. I had asked Chuck from Rotary Extreme about it and he said that the FEED HIDs only fit into the FEED bumper.
To me though the 99 turn signal and FEED HID assembly look the same in shape.
#9
Junior Member
Thread Starter
Join Date: May 2003
Location: San Francisco
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
so I'm assuming that i can buy any replica bumper with the 99+ signal cutouts for my 93. then just buy the signals.
i am wondering will the lights fit right in. is it easy to plug in.
bumper with 99 cutouts an sgnal lamps would cost around 900 bucks.
cheaper than get that 99 front for 1500
i am wondering will the lights fit right in. is it easy to plug in.
bumper with 99 cutouts an sgnal lamps would cost around 900 bucks.
cheaper than get that 99 front for 1500
#10
Lives on the Forum
iTrader: (9)
I wish someone would do a group buy on the Pettit front end rather than the OEM with that stupid plate block. We could prolly get em for 400 bucks!
Mazda would have made a small fortune just selling 99 OM front end kits if they had left that stupid block off... it still baffles me... what were they thinking?!
Mazda would have made a small fortune just selling 99 OM front end kits if they had left that stupid block off... it still baffles me... what were they thinking?!
Originally posted by David Hayes
Pettit Racing carries for $550 a replica of the 99 spec bumper without the license plate "square" on the front. On the downside, it's made out of fiberglass.
Pettit Racing carries for $550 a replica of the 99 spec bumper without the license plate "square" on the front. On the downside, it's made out of fiberglass.
#13
Rotary Freak
Join Date: Oct 2002
Location: Salem, IN
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
i just ordered '99 stuff from www.rx7store.net
you can get the bumper, turn signals, rebar, and lip for $1298. you can ditch the rebar and mod the stock one and save $375
you can get the bumper, turn signals, rebar, and lip for $1298. you can ditch the rebar and mod the stock one and save $375
Thread
Thread Starter
Forum
Replies
Last Post
NCross
1st Generation Specific (1979-1985)
9
08-29-15 01:55 PM
JIMMY54
1st Generation Specific (1979-1985)
2
08-12-15 05:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM