Haltech Wideband and PS1000 Help
08-14-11, 03:21 PM
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: UK
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Wideband and PS1000 Help
Hey Guys,
i have recently purchased the AEM wideband gauge and sensor. I have it installed and gauge is working well.. Here comes there issue...
I have the 0v-5v output (white wire) wired into the AVI11/ O2 Input (shielded GY/O) wire of the o2 wires.. I have the calibration as per AEM 0v = 9 and 5v = 19
When the car is running i for the life of me can not get the live AFR to show in the ECU manager!!
Any help is appreciated guys !!
Thanks
i have recently purchased the AEM wideband gauge and sensor. I have it installed and gauge is working well.. Here comes there issue...
I have the 0v-5v output (white wire) wired into the AVI11/ O2 Input (shielded GY/O) wire of the o2 wires.. I have the calibration as per AEM 0v = 9 and 5v = 19
When the car is running i for the life of me can not get the live AFR to show in the ECU manager!!
Any help is appreciated guys !!
Thanks
08-15-11, 09:09 AM
#2
Right-click on the ECU Manager page. Select whatever type of display you'd like to use. I use number display for the wideband. Once the display appears right-click on it and click on select channel. You should be able to scroll down and see "Calibrations-O2 Wideband Sensor 1". Click on that and you'll have your display.
