I would have to get a wideband that is not a common one.
Anyone know how to hook this thing up so that I can read O2 on my PC?(Haltech)

 

What model techedge?

 

looks like this WBo2 2Y DIY Wideband Unit
and this may help WBo2 2Y User Manual
that is about how far I got.
Note: black end plate holds power(12v) sensor input and O2 display.I got the wideband up and working.(simple hook up since all connectors were different and specific..lol!)

 

Looks like you connect the Wblin+ output would be connected to the O2 input of the Haltech. Default configuration of the TE appears to be 0V=9:1 5V=19:1

 

yup. its easy as pie. i have a tech edge and they work AWESOME.

 

I still laugh at that saying!.Years ago my sister made biscuits.We played Road hockey with them!..Finally killed one when someone slap shot the thing into a brick wall.It shattered!
so..moral of the story?..no Pie is "easy"..lol!
.......
Thanks Chris for the info..(and Sir C for the Memory..chuckle!)

 

just remember that the outputs and inputs for the tech edge are all abbreviations. WBlin- takes the output and sends it out as a voltage the haltech can read. WBlin+ is a wideband signal INPUT. maybe use the unit as a gauge. who knows.

NBsim is a narrowband simulator if you want to simulate a narrowband for the purpose of tricking an ecu or something. the RPM input is used if you want to map the AFR with an rpm.

the only thing you need is the WBlin-

 

Ok,now that makes me scratch my head.
I think I had grey wire/O stripe?? (haltech) to my Innovate.
If I hook the WBlin- to the grey/o wire it should read on my Laptop?.
Thanks...
Also,CHRIS: if you read this,pm me with info on how I can send you my Map.( I hate being "old" and computer illiterate.)
I got the car running but it falls on it's face,when I try to increase speed.(no Boost at all..Bog..)
My "Tuner" is no where to be found.
Thanks.

 

You have my email. Send me the map and some logs and I'll see what we can do.

 

.I would But I have no clue how to get INFO to send it..Like how to get to the map to copy it and then send it.
(5:43 am?..holy crap!).
( rotorstyx@yahoo.com )

 

That should be 4:43 am. Must not have the right setting in my profile. I get up at 4 through the week.

I'll send you an email and try to explain how to get the info.