Haltech ignition wire (grey wire to haltech E6K) which wire do you use?

Reply Subscribe

Thread Tools

Search this Thread

Sep 16, 2007 | 10:11 AM

88rxn/a

Thread Starter

tom port.. AKA streetport

iTrader: (6)

Joined: Jan 2005

Posts: 4,658

Likes: 0

From: ludlow, pa

ignition wire (grey wire to haltech E6K) which wire do you use?

i figure im going to use the IG1 black with yellow strip right from the ignition and run it over to the passenger side for my haltech ignition (grey) wire. is this what you guys use?

12 volts on run and 12 volts on start

Sep 16, 2007 | 05:19 PM

FrankV702

Rotary Freak

iTrader: (14)

Joined: May 2006

Posts: 1,575

Likes: 11

From: Las Vegas

Thats what wire I used for my haltech.

Sep 16, 2007 | 07:22 PM

Claudio RX-7

EFI Tech Wannabe

iTrader: (1)

Joined: Sep 2003

Posts: 2,415

Likes: 10

From: D.R., USA, the world...

Yeah, the rule is you need a 12V switched wire that also has power when cranking, so the ideal one is the same wire that would've provided the same thing to the stock ECU.