Haltech Forum Area is for discussing Haltechs

Haltech e8 s4 plug and play

Thread Tools
 
Search this Thread
 
Old Sep 7, 2009 | 09:25 PM
  #1  
87turboIIpat's Avatar
Thread Starter
boostedfc
Tenured Member 10 Years
 
Joined: Nov 2008
Posts: 63
Likes: 0
From: Kingman,Az
e8 s4 plug and play

i bought a s4 plug and play and there is a connector i dont know what it is.



can anyone tell me what this plug is for . sorry for the crappy pic. i dont have a good camera
Reply
Old Sep 9, 2009 | 06:15 PM
  #2  
87turboIIpat's Avatar
Thread Starter
boostedfc
Tenured Member 10 Years
 
Joined: Nov 2008
Posts: 63
Likes: 0
From: Kingman,Az
man someone got to know what this plug is. I know two of the lead plug into the haltech ecu anther one for the map sensor and one for the laptop. but i need help figuring what that plug is for.
Reply
Old Sep 9, 2009 | 08:52 PM
  #3  
C. Ludwig's Avatar
www.lms-efi.com
Tenured Member: 25 Years
Liked
Loved
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,268
Likes: 147
From: Floyds Knobs. IN
The 5 pin connector is for the map sensor and the air temp sensor. The 3 pin connector is for the spare a/d 2. I have a schematic I can send you if you want it. Drop me an email. ludwigmotorsports@insightbb.com Where is the customer support from the dealers you guys are buying this stuff from?
Reply
Old Sep 9, 2009 | 09:28 PM
  #4  
87turboIIpat's Avatar
Thread Starter
boostedfc
Tenured Member 10 Years
 
Joined: Nov 2008
Posts: 63
Likes: 0
From: Kingman,Az
thanks for the info. sorry but what is a spare a/d 2 and does it have to be wired in to run the system or can i wire it in later .

Last edited by 87turboIIpat; Sep 9, 2009 at 09:30 PM.
Reply
Old Sep 10, 2009 | 06:19 AM
  #5  
fritts's Avatar
Mad Man
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Aug 2002
Posts: 2,128
Likes: 4
From: Indiana
Originally Posted by C. Ludwig
The 5 pin connector is for the map sensor and the air temp sensor. The 3 pin connector is for the spare a/d 2. I have a schematic I can send you if you want it. Drop me an email. ludwigmotorsports@insightbb.com Where is the customer support from the dealers you guys are buying this stuff from?
Before you complain about the dealer that sold it not providing support you should ask if the poster contacted the dealer.
Reply
Old Sep 10, 2009 | 08:08 AM
  #6  
Claudio RX-7's Avatar
EFI Tech Wannabe
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 2,415
Likes: 10
From: D.R., USA, the world...
Buyers have to know they have to contact the seller for the first line of support. If they cant handle the support, either not being reachable or not knowing the answer to the question, you should probably contact Haltech. But the dealer should (and needs) to provide support for the product sold through them and customers should know this as well. This is imperative.
Reply
Old Sep 10, 2009 | 08:17 AM
  #7  
fritts's Avatar
Mad Man
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Aug 2002
Posts: 2,128
Likes: 4
From: Indiana
I understand what you mean Claudio but if your not contacted regarding a question you can't help in the first place. Many use the forums as a means of support. Look at how many questions are asked here. I find that customers are at very different levels of support needs when they buy product. Some have no questions (not their first go around) others are a 10 phone call and 20 email situation to get to start up.

BTW we didn't sell this unit.
Reply
Old Sep 10, 2009 | 08:27 AM
  #8  
Claudio RX-7's Avatar
EFI Tech Wannabe
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 2,415
Likes: 10
From: D.R., USA, the world...
Originally Posted by fritts
I understand what you mean Claudio but if your not contacted regarding a question you can't help in the first place. Many use the forums as a means of support. Look at how many questions are asked here. I find that customers are at very different levels of support needs when they buy product. Some have no questions (not their first go around) others are a 10 phone call and 20 email situation to get to start up.

BTW we didn't sell this unit.
I hear ya Ryan, really, i understand, i guess that the ideal solution when anybody sells a product the first thing they should tell the customer is "come to us first if you have any problems". Its all in the customer service i guess.

But, there will always be those situations where people need support faster than a phone call to their dealer. Or, its a weekend and the dealer cant be reached.
Reply
Old Sep 10, 2009 | 04:09 PM
  #9  
C. Ludwig's Avatar
www.lms-efi.com
Tenured Member: 25 Years
Liked
Loved
iTrader: (27)
 
Joined: Mar 2001
Posts: 5,268
Likes: 147
From: Floyds Knobs. IN
My line of thinking is along that of what Claudio said in his first post. How many simple questions are repeated over and over on this board? Multiply that all over the internet, dash in some angry users who are angry mostly because they are poorly informed and it looks bad on the manufacturer.

Sorry you took it personally.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
WyomingTII
Rtek Forum
3
Oct 26, 2015 05:26 PM




All times are GMT -5. The time now is 02:23 AM.