Haltech E6K datalog problem
#1
Gone Darkside
Thread Starter
iTrader: (14)
Join Date: Mar 2001
Location: Irmo, SC USA
Posts: 2,569
Likes: 0
Received 0 Likes
on
0 Posts
E6K datalog problem
I've done a bit of searching on the forum and on the web with no luck, so here goes.
I did a few highway runs last night to datalog with the new wideband and when I went to look at them I noticed that the Time Index was at 0:00:00 for most of the run. When it DID start to count, I would see something like this:
0:00:00
0:00:00
0:00:00
0:00:00
0:00:00
0:00:01
0:00:02
0:00:02
0:00:02
0:00:03... etc.
I know that the system records roughly 10 times/second, so what would be causing an issue like this? Would reloading the firmware help? I got this problem with the regular E6Kv634.exe and with the E6Ku.exe with UEGO support, so I don't believe that is the problem.
Any ideas?
Reese
I did a few highway runs last night to datalog with the new wideband and when I went to look at them I noticed that the Time Index was at 0:00:00 for most of the run. When it DID start to count, I would see something like this:
0:00:00
0:00:00
0:00:00
0:00:00
0:00:00
0:00:01
0:00:02
0:00:02
0:00:02
0:00:03... etc.
I know that the system records roughly 10 times/second, so what would be causing an issue like this? Would reloading the firmware help? I got this problem with the regular E6Kv634.exe and with the E6Ku.exe with UEGO support, so I don't believe that is the problem.
Any ideas?
Reese
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM