E6K datalog problem
 

I've done a bit of searching on the forum and on the web with no luck, so here goes.

I did a few highway runs last night to datalog with the new wideband and when I went to look at them I noticed that the Time Index was at 0:00:00 for most of the run. When it DID start to count, I would see something like this:

0:00:00
0:00:00
0:00:00
0:00:00
0:00:00
0:00:01
0:00:02
0:00:02
0:00:02
0:00:03... etc.

I know that the system records roughly 10 times/second, so what would be causing an issue like this? Would reloading the firmware help? I got this problem with the regular E6Kv634.exe and with the E6Ku.exe with UEGO support, so I don't believe that is the problem.

Any ideas?

Reese