snapcaseacilec

iTrader: (3)

Anybody know how to do it. I'm stuck, same goes for the magnetic senors for the crank/trigger wiring.

Thanks in advance
Nieto

RETed

You can't really use the stock FD MAP sensor, since it's like a 2.2 or 2.3 bar MAP sensor.
It's going to throw all the scales off, and I don't think any of the Haltech proggies can adjust for it.


-Ted

snapcaseacilec

iTrader: (3)

What about the TPS, the haltech has three wires and well the tps has four what's up with that, any hints on the magnetic sensors?

RETed

The other questions have all been answered several times over.
A proper search should turn up your answers in this section.


-Ted

snapcaseacilec

iTrader: (3)

I've done many searches, I'm all searched out, I've put specifcally and broad, and I've read but I can't find. any help would be appricated or am I spelling TPS wrong alond with E8, not to get sarcastic, but are there other words and abbriviations that I'm not using correctly. My haltech provider assistance guy is busy doing his own thing (like making money) and is almost impossible to get ahold of when I had these questions, still haven't heard anything. I'll still be searching and when I find it or figure it out I willl post it, if anyone ever PM's me asking where they can find it I will tell them directly, instead of telling them to search it not knowing if they ever found what they were looking for. besides I'd hate to hear of someones 7 not run and just sit. Which I know of 3 and hate seeing it like that.



Again thanks in advance for any help that can be given.

I'm a mechanic not a genius or a scholar (don't even know if that's right)
Later Days
Nieto

dubulup

this mechanic needs to learn to search google also...

search: haltech rx7 tps wiring

5th from the top

http://www.k2rd.com/haltech/drawings/TP03.pdf

dubulup

more specific

Br/B - B
Br/W - O
B/G - W

snapcaseacilec

iTrader: (3)

I use yahoo but I'll have to switch, thanks for the driection

dubulup

no problem...feel free to ask wiring questions in this thread, I should be able to answer.

I've posted how to run the fans one speed higher than what I was able to find anywhere else.

https://www.rx7club.com/showthread.p...highlight=hint

crispeed

Is this for the E-8 ecu?

GUITARJUNKIE28

it'll work for that one too.
orange = reference
black = ground
white = signal

it's all in the manual.