BDC

Hey folks, I just finished entirely re-working my old Haltech E6K and E6X installation notes for the FC3S. Some of this data may help with the FD3S but this is directly geared towards the 2nd gen. It's also been updated with the new sequential leading spark setup. It's a much more concise installation document over the previous. I'm also placing this document up on my website located here:

http://bdc.cyberosity.com/d/13942-1/...7ab6c80fd64396

Claudio, can this thread be sticky'd please?

B

The Shaolin

iTrader: (5)

Going to be undertaking this project in a couple of months, this will help greatly! THANKS!

BDC

I'd like your feedback on it, Shaolin! Let me know how I did on the document on the day you install yours.

B

rx7fc90

just wanted to ask if what is marked red is correct doesn't it have to be INJ4 Pink Injector 4 Rear secondary ?

INJ1 Light Blue (Injector 1, Front Primary)
INJ2 Blue with Red Stripe (Injector 2, Rear Primary)
INJ3 Green w/ Red Stripe (Injector 3, Front Secondary)
INJ4 Pink (Injector 4, Rear Primary)

this is my first install of a haltech just wanted to ask sorry if im mistaken

Great write up tho...

BDC

Woops! Thanks for noticing that. I gotta fix that. Should be Rear Secondary. Now I'm embarassed!

B

BDC

Alrighty. It's fixed. I hope there's nothing else I typo'd on!

http://bdc.cyberosity.com/d/13946-1/...tes_010909.txt

B

87 t-66

iTrader: (133)

i know this is an old thread...but is this info still on your site somewhere? i couldn't find it.

BDC

Hmmm, it looks like I yanked it off. Don't remember doing that. Do you need it? Shoot me an email at bdc@bdcmotorsports.com and I'll fire it off to you.

B