Group Buy & Product Dev. FC RX-7 Post your possible group buys and product interest for the 1986 through 1992 FC series RX-7 in this section.
Sponsored by:

stainless braided OMP line sets, now in more colors!

Old 12-02-11, 05:05 PM
  #1  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
stainless braided OMP line sets, now in more colors!

pricing per set for the FC3S set of lines in any of the 4 colors is $102 shipped within the US and $110 for international orders. made payable to my paypal account at: [email protected].

this is a semi limited group buy until i run out of fittings to build the lines or find more. if anyone has a number of the line end fittings i am looking for more. they must be in decent rebuildable condition. PM me and i will see if we can work out a price depending on how many you have.

please send me a PM when you order a set and i will check that the payment has gone through to get the production and shipping process completed. turnaround time is usually same day as noted from the original thread here(unless on a weekend or holiday then i will ship them on monday):
https://www.rx7club.com/vendor-classifieds-276/fc-fd-stainless-dual-sheath-oil-metering-pump-lines-977750/


non turbo set, clear color:

turbo set, clear color:


here is a smoked set on an FD setup:

and an easy to follow diagram for customers:


i will get pics posted up of the other color line sets as soon as i can.

Thanks,
-Ben

Last edited by RotaryEvolution; 12-02-11 at 05:08 PM.
RotaryEvolution is offline  
Old 12-02-11, 05:07 PM
  #2  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
please note at this time i only have enough clear line for one more set until the shop gets the stock order in next week. i will post an update once i get more in stock.
RotaryEvolution is offline  
Old 12-02-11, 06:42 PM
  #3  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
here is what it looks like in red, completed:

RotaryEvolution is offline  
Old 12-02-11, 07:40 PM
  #4  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
and blue:



ok now i can stop whoring the 3 forums.
RotaryEvolution is offline  
Old 12-06-11, 02:50 AM
  #5  
Full Member
5 Year Member
iTrader: (7)
 
rusty FC's Avatar
 
Join Date: Jul 2008
Location: Brandon, MS
Posts: 132
Likes: 0
Received 0 Likes on 0 Posts
nice
rusty FC is offline  
Old 12-06-11, 05:44 AM
  #6  
Full Member
iTrader: (1)
 
Join Date: Jul 2011
Location: Sydney, Australia
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Payment sent Ben.
Cheers
Cam
Cambo_88 is offline  
Old 12-06-11, 06:26 AM
  #7  
Rotary Freak
5 Year Member
iTrader: (2)
 
JWteknix's Avatar
 
Join Date: Mar 2006
Location: Wayne NJ
Posts: 2,508
Likes: 0
Received 0 Likes on 0 Posts
nice to see someone started making theses again. looks good
JWteknix is offline  
Old 12-06-11, 08:58 AM
  #8  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
Originally Posted by Cambo_88 View Post
Payment sent Ben.
Cheers
Cam
will send yours out with today's shipment.
RotaryEvolution is offline  
Old 12-08-11, 04:47 PM
  #9  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
clear line now in stock again. looking for more OE fittings if anyone is sitting on a pile of broken OMP lines with fittings on them and wants to make a few bucks let me know.
RotaryEvolution is offline  
Old 01-08-12, 11:47 AM
  #10  
Brap Brap Brap
iTrader: (3)
 
cab91089's Avatar
 
Join Date: Jan 2010
Location: Pennsylvania
Posts: 981
Likes: 0
Received 0 Likes on 0 Posts
Those are nice lines theyre definitely worth the price I need to get a set when i t2 swap and rebuild the engine
cab91089 is offline  
Old 01-13-12, 03:35 PM
  #11  
Senior Member
iTrader: (3)
 
J5sense's Avatar
 
Join Date: Jun 2011
Location: West Chicago
Posts: 420
Likes: 0
Received 0 Likes on 0 Posts
4 mo ago i needed these! would buy if i was doing it all over again. looks great
J5sense is offline  
Old 01-14-12, 08:11 AM
  #12  
Gap Slayer!
10 Year Member
iTrader: (13)
 
PortedRotorTuner's Avatar
 
Join Date: Aug 2005
Location: Columbus, OH
Posts: 369
Likes: 0
Received 0 Likes on 0 Posts
Need a set of clear for 87' Turbo
PortedRotorTuner is offline  
Old 01-15-12, 05:55 PM
  #13  
Rotary Revolutionary
10 Year Member
iTrader: (16)
 
sharingan 19's Avatar
 
Join Date: May 2006
Location: Jacksonville, Tampa & Tallahassee
Posts: 3,881
Likes: 0
Received 0 Likes on 0 Posts
You if you keep coming out with all these useful products I'm just going to ship my car to NV and let you install them too, lol.
sharingan 19 is offline  
Old 01-21-12, 01:06 PM
  #14  
PedoBear
iTrader: (4)
 
nycgps's Avatar
 
Join Date: Jun 2006
Location: Bye NYC. you SUCKED!
Posts: 1,420
Received 0 Likes on 0 Posts
Ahhhh i bought all new omp lines couple months ago!!! Argh

I think i still have my old fittings somewhere. Need to check and hope i didnt throw it away.

If i send you my fitting, how much would it cost to make a set of these shipped to 11375? I probably wont need yo use it for couple of years but it doesnt hurt ti have a spare around.you can pm me if you want.

Thanks man.
nycgps is offline  
Old 01-22-12, 12:22 PM
  #15  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
$10 off if you supply your own set of fittings for the 4 line FC set. $5 off for an FD set(only 2 lines). OR if you have spares that is how much i am paying to buy decent used ones. originally a had a decent sized box with broken lines, that box is now empty.

i have a few sets of fittings left but inventory is now bouncing off the floor trying to keep the banjos in stock. so far still a few left that are not spoken for.

i found some replacements new but the the banjos(brake hardware) alone are $80 for an FC set of lines... that would put the materials cost at $115 for an FC set and i still would have to check fitment and get them clocked, so overall with new banjos the price would probably be in the $175 shipped range(still not bad considering). i am still digging though to try and find something more cost effective to keep the price down and build them 100% new.

Last edited by RotaryEvolution; 01-22-12 at 12:34 PM.
RotaryEvolution is offline  
Old 01-24-12, 01:04 PM
  #16  
Senior Member
iTrader: (9)
 
Join Date: Sep 2010
Location: Boulder, CO
Posts: 411
Likes: 0
Received 1 Like on 1 Post
Any chance I can still get a set of blue for a s5 t2? Unfortunately I don't have fittings I can send to you.
Brigdh is offline  
Old 01-24-12, 11:20 PM
  #17  
Turbo vert
10 Year Member
iTrader: (33)
 
just startn's Avatar
 
Join Date: Aug 2005
Location: Elyria, OH
Posts: 2,696
Likes: 0
Received 0 Likes on 0 Posts
i have sets of lines. there good still but...
just startn is offline  
Old 02-10-12, 09:32 PM
  #18  
Senior Member
5 Year Member
 
Join Date: Aug 2007
Location: Rosemead
Posts: 343
Likes: 0
Received 0 Likes on 0 Posts
still have clear for s4 t2?
FCs4226 is offline  
Old 07-02-12, 12:42 AM
  #19  
Blah, Blah, blah
10 Year Member
iTrader: (13)
 
Otay's Avatar
 
Join Date: Feb 2001
Location: Tacoma, WA
Posts: 307
Likes: 0
Received 0 Likes on 0 Posts
Back from the dead!!!
4 complete FC sets headed your way!!

Otay is offline  
Old 07-04-12, 05:58 AM
  #20  
Junior Member
 
Join Date: Jul 2012
Location: Colorado
Posts: 36
Likes: 0
Received 0 Likes on 0 Posts
Why not use stainless wire ties? They are cheap enough from places like Home Depot...
superjeff is offline  
Old 07-07-12, 05:46 PM
  #21  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
got em, Thanks Otay. will get yours done over the weekend.

Jeff, not sure about wire ties. the clamps i use are basically OEM style 2 ear clamps but stainless steel(at least they are claimed to be, never did any corrosion tests). if it works, why mess with it? i also add a little sealant to prevent leaks and have heard no complaints so far even on modded turbo applications. these clamps may look cheap but they are not. almost $5 for 8 of those little bastards and they offer decent clamping force, required for these multi layer lines. unless you mean the nylon ties i used for the pictures? those are just for aesthetics to keep the lines in place for the pictures, the lines will fit into the stock armatures with a little tweaking since the lines are fatter. other fasteners are up to the customer to play with.

anyone else interested in discounts providing your own fittings or just looking to sell the banjos i'm always looking for extras as it's tough to keep them in stock.

so right now i have about 3 spare FC sets left or 6 FD sets for those who i didn't get back to.

Last edited by RotaryEvolution; 07-07-12 at 06:00 PM.
RotaryEvolution is offline  
Old 07-13-12, 02:44 AM
  #22  
Blah, Blah, blah
10 Year Member
iTrader: (13)
 
Otay's Avatar
 
Join Date: Feb 2001
Location: Tacoma, WA
Posts: 307
Likes: 0
Received 0 Likes on 0 Posts
WA

How's it going Ben, eta on the lines?
Otay is offline  
Old 07-28-12, 05:56 PM
  #23  
Sharp Claws
Thread Starter
iTrader: (30)
 
RotaryEvolution's Avatar
 
Join Date: Oct 2003
Location: Central Florida
Posts: 5,135
Likes: 0
Received 12 Likes on 11 Posts
have one set in clear for a turbo FC ready to go.

RotaryEvolution is offline  
Old 07-28-12, 06:08 PM
  #24  
Vintage sportcars
 
StevenL5975's Avatar
 
Join Date: Jun 2010
Location: Luxembourg
Posts: 339
Likes: 0
Received 0 Likes on 0 Posts
These omp lines look great

I guess they will last a lot longer than the stockers.
Actually I have a used set (S4 NA) of omp lines over here. My friend might have another one on shelf (S5 T2). And tomorrow I will get a third set (96 JDM FD).

I think we might be able to work something out as I absolutly need a set of these for my race engine (S4 NA). Will ask the FD owner if he is interested in a set too

Steven
StevenL5975 is offline  
Old 07-29-12, 07:33 AM
  #25  
IFO Forced Induction Slo
10 Year Member
iTrader: (3)
 
bigdv519's Avatar
 
Join Date: Mar 2004
Location: Houston
Posts: 1,315
Likes: 0
Received 0 Likes on 0 Posts
Just seeing this thread and these lines look awesome. I built a set years ago but they were not protected on the outside...they were bare metal.
Bump up for a great guy and great looking product.
bigdv519 is offline  

Thread Tools
Search this Thread
Quick Reply: stainless braided OMP line sets, now in more colors!


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.