Respeed Steering Rack Group Buy
08-30-11, 12:43 PM
#126
Truthfully, I had similar issues with them. My bigger issue that I later found out was that Flaming River has their own special inner tie rods (needed replacing after the bellows had been cracked for some while) that can only be ordered through them. I initially had the impression that they can bought for any of those mustang years and be able to swap them in, but after order a couple different ones locally and not being able to fit them on, I called up Flaming River to be told the bad news.
Now the Bellows you can get anywhere really for them. You just need to order them for a f-body mustang just like what the rack is. I personally bought the moog one and they seem to be a better quality.
Just for the record also, none of our current racks are from there any more.
Now the Bellows you can get anywhere really for them. You just need to order them for a f-body mustang just like what the rack is. I personally bought the moog one and they seem to be a better quality.
Just for the record also, none of our current racks are from there any more.
09-01-11, 08:39 PM
#128
Junior Member
Join Date: Aug 2011
Location: Vermont
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Re-Speed. Going to check tomorrow to see if my cross memeber is the same as OEM. Anyone know the measurement?. I have no idea with this car. It seems the only stock parts are the interior and turret w/doors. I gotta post more pics.
^^
10-13-11, 03:50 PM
#136
All the laser parts are already in and anything that could be welded already has been.
All lathe parts we just finished last night for them.
12-04-11, 11:00 PM
#144
Rockin' 1st Gen
12-07-11, 03:43 PM
#145
Hey Guys,
I owe each and everyone of you guys an apology for the extreme delay in response and shipping of these kits. I had a crazy month last month with local work that has put me far behind with all your orders. I thought I would be able to get everything done for this group buy earlier last month when the CNC parts came in, but obviously I failed at doing so. All is back on track now and all I'll be doing today and tomorrow is welding up your racks, powder coating them and boxing them to be shipped out.
I hope you guys forgive me, and I truly understand your frustration as I would be also if I were in your shoes.
Regards,
Sam
I owe each and everyone of you guys an apology for the extreme delay in response and shipping of these kits. I had a crazy month last month with local work that has put me far behind with all your orders. I thought I would be able to get everything done for this group buy earlier last month when the CNC parts came in, but obviously I failed at doing so. All is back on track now and all I'll be doing today and tomorrow is welding up your racks, powder coating them and boxing them to be shipped out.
I hope you guys forgive me, and I truly understand your frustration as I would be also if I were in your shoes.
Regards,
Sam
12-07-11, 06:32 PM
#146
Rockin' 1st Gen
Hey Guys,
I owe each and everyone of you guys an apology for the extreme delay in response and shipping of these kits. I had a crazy month last month with local work that has put me far behind with all your orders. I thought I would be able to get everything done for this group buy earlier last month when the CNC parts came in, but obviously I failed at doing so. All is back on track now and all I'll be doing today and tomorrow is welding up your racks, powder coating them and boxing them to be shipped out.
I hope you guys forgive me, and I truly understand your frustration as I would be also if I were in your shoes.
Regards,
Sam
I owe each and everyone of you guys an apology for the extreme delay in response and shipping of these kits. I had a crazy month last month with local work that has put me far behind with all your orders. I thought I would be able to get everything done for this group buy earlier last month when the CNC parts came in, but obviously I failed at doing so. All is back on track now and all I'll be doing today and tomorrow is welding up your racks, powder coating them and boxing them to be shipped out.
I hope you guys forgive me, and I truly understand your frustration as I would be also if I were in your shoes.
Regards,
Sam
are there to be done and when are you expecting to ship them out? Jusk asking
because I have about three weeks before I move and want to make sure I have
a place to ship it to. Thanks for the update and looking forward to seeing the
awesome parts.
Brandon
12-07-11, 08:03 PM
#147
There are 5 that I'm building right now. All that is left to finish them right now is the center parts which they're all about 50% done. I should be finishing all the welding on them tonight, and then tomorrow will be powder coating day. It takes about an hour to powder coat each one, so I could potentially have a couple shipped out tomorrow.
You're first to be shipped out as you're first ordered.
You're first to be shipped out as you're first ordered.
12-07-11, 09:22 PM
#148
Rockin' 1st Gen
There are 5 that I'm building right now. All that is left to finish them right now is the center parts which they're all about 50% done. I should be finishing all the welding on them tonight, and then tomorrow will be powder coating day. It takes about an hour to powder coat each one, so I could potentially have a couple shipped out tomorrow.
You're first to be shipped out as you're first ordered.
You're first to be shipped out as you're first ordered.