Respeed Steering Rack Group Buy
09-03-10, 08:05 PM
#1
Respeed Steering Rack Group Buy
1978-1985 Rx7, Stage II Rack/Pinion Conversion normally $825.00 -
GROUP BUY PRICE - $700
Must be at least 5 people buying
Click for image
The ReSpeed Rack and Pinion Kit starts with our adjustable crossmember but does not stop there. The crossmember utilizes Laser cut plates and CNC machined tubing fully welded within a CNC machined welding fixture. The stock front stay rods are replaced with new rear arms that convert the stock lower control arms into lower "A" arms. The new chassis brackets for these two new suspension points are completely bolt in and feature laser cut plates and quality welding throughout. The same adjustable pickup points as the crossmember are carried into the brackets as well. This is a complete suspension and steering upgrade.
Customer will retain their struts, lower control arms, steering arms, upper steering shaft and complete steering shaft housing.
This is a complete suspension and steering upgrade. Our rack choice allows for 20:1 standard ratio and 15:1 quick ratio. The rack used is from one of the longest running production vehicles in history, the "fox" chassis mustang. This means the units as well as replacements parts are readily available. The racks can be purchased separately from ReSpeed or many internet and local sources. They range from $122.00 for a rebuilt unit from your local auto parts store up to $259.00 for the all new brand name units we offer.
Kit Features:
•Adjustable lower control arm pivot points
•Urethane lower "A" arm bushings
•Urethane engine mounting. (Aluminum engine mounting option)
•99% bolt in. Mounts without modification to the chassis.
•Designed to fit both 12A and 13B engines.
•Brand name steering u joints
•Does not hinder the operation of the collapsibility of the stock steering shaft
•Added angle designed into the lower steering linkage for 2 more points of collapsibility.
•Available quick ratio rack that will transform the vehicle into a pleasure to drive.
•Uses stock outer tie rods (Rod End Tie Rod Kit Option).
Kit comes with all the mounting hardware needed. Customer will need to supply: Stock Lower control arms. Stock Outer tie rods. Stock steering column tube. Stock upper steering shaft. Rack sold separately from our choice of ratios or can be picked up at you local auto parts store.
Assembly should be performed by a competent mechanic familiar with the Mazda rx7 steering and suspension system. Vehicle will need alignment when completed. Caster and Toe will absolutely need to be reset. This system offers an adjust ability never before seen on a stock chassis rx7. Hence, the responsibility of the end use of this system falls solely on the end user. There are over 36 forms of adjustment with this system, each one rendering different dynamic changes. Our installation manual will explain the stock locations.
Stock air conditioning pump must be relocated and moved up if equipped.
Product is currently manufactured per order. Please allow 4 weeks delivery. For this slight inconvenience, we will powder coat the crossmember your choice of our standard colors. (link below)
OPTIONAL ENGINE MOUNT: This item replaces the urethane engine bushing with an aluminum engine bushing. This option more solidly mounts your engine to help prevent loss of torque and engine windup during acceleration. - Recommended for Race/Track vehicles.
GROUP BUY PRICE - $700
Must be at least 5 people buying
Click for image
The ReSpeed Rack and Pinion Kit starts with our adjustable crossmember but does not stop there. The crossmember utilizes Laser cut plates and CNC machined tubing fully welded within a CNC machined welding fixture. The stock front stay rods are replaced with new rear arms that convert the stock lower control arms into lower "A" arms. The new chassis brackets for these two new suspension points are completely bolt in and feature laser cut plates and quality welding throughout. The same adjustable pickup points as the crossmember are carried into the brackets as well. This is a complete suspension and steering upgrade.
Customer will retain their struts, lower control arms, steering arms, upper steering shaft and complete steering shaft housing.
This is a complete suspension and steering upgrade. Our rack choice allows for 20:1 standard ratio and 15:1 quick ratio. The rack used is from one of the longest running production vehicles in history, the "fox" chassis mustang. This means the units as well as replacements parts are readily available. The racks can be purchased separately from ReSpeed or many internet and local sources. They range from $122.00 for a rebuilt unit from your local auto parts store up to $259.00 for the all new brand name units we offer.
Kit Features:
•Adjustable lower control arm pivot points
•Urethane lower "A" arm bushings
•Urethane engine mounting. (Aluminum engine mounting option)
•99% bolt in. Mounts without modification to the chassis.
•Designed to fit both 12A and 13B engines.
•Brand name steering u joints
•Does not hinder the operation of the collapsibility of the stock steering shaft
•Added angle designed into the lower steering linkage for 2 more points of collapsibility.
•Available quick ratio rack that will transform the vehicle into a pleasure to drive.
•Uses stock outer tie rods (Rod End Tie Rod Kit Option).
Kit comes with all the mounting hardware needed. Customer will need to supply: Stock Lower control arms. Stock Outer tie rods. Stock steering column tube. Stock upper steering shaft. Rack sold separately from our choice of ratios or can be picked up at you local auto parts store.
Assembly should be performed by a competent mechanic familiar with the Mazda rx7 steering and suspension system. Vehicle will need alignment when completed. Caster and Toe will absolutely need to be reset. This system offers an adjust ability never before seen on a stock chassis rx7. Hence, the responsibility of the end use of this system falls solely on the end user. There are over 36 forms of adjustment with this system, each one rendering different dynamic changes. Our installation manual will explain the stock locations.
Stock air conditioning pump must be relocated and moved up if equipped.
Product is currently manufactured per order. Please allow 4 weeks delivery. For this slight inconvenience, we will powder coat the crossmember your choice of our standard colors. (link below)
OPTIONAL ENGINE MOUNT: This item replaces the urethane engine bushing with an aluminum engine bushing. This option more solidly mounts your engine to help prevent loss of torque and engine windup during acceleration. - Recommended for Race/Track vehicles.
Last edited by Directfreak; 11-07-10 at 09:41 PM.
11-03-10, 07:19 AM
#2
I believe the whole thing is different on the PS cars, so you will want to get everything from a non-PS car, also when you do that make sure you know the year (mainly if its a SA vs FB column) as the steering box end of the tube is different and Billy will need to know which one you have in order to give you the correct bushing and tube support bracket.
Last edited by Directfreak; 11-07-10 at 09:34 PM.
11-06-10, 09:02 AM
#3
Thanks guys, I am blushing 
The power steering housing/shaft are different than non-power steering cars. The parts you require will be the upper steering shaft with the spline for the steering wheel and the "black" outer housing that goes all the way thru the firewall down to the steering box. This is a split housing so you must take care not to slip the split joint when removing it from the steering box.
-billy
The power steering housing/shaft are different than non-power steering cars. The parts you require will be the upper steering shaft with the spline for the steering wheel and the "black" outer housing that goes all the way thru the firewall down to the steering box. This is a split housing so you must take care not to slip the split joint when removing it from the steering box.
-billy
Last edited by Directfreak; 11-07-10 at 09:22 PM.
11-07-10, 04:30 PM
#6
I just looked at our last special and they were $750 with $235 15:1 racks.
https://www.rx7club.com/1st-generation-rx-7-1979-1985-parts-101/respeed-stage-ii-rack-pinion-kit-special-910348/
I can do that price again for 3-5 kits. 5+ Kits and I can go to $700 for the kit and $199 for the rack (call it a holiday special
)
Lets get a count together of interested guys to see where we start the price.
-billy
https://www.rx7club.com/1st-generation-rx-7-1979-1985-parts-101/respeed-stage-ii-rack-pinion-kit-special-910348/
I can do that price again for 3-5 kits. 5+ Kits and I can go to $700 for the kit and $199 for the rack (call it a holiday special
)Lets get a count together of interested guys to see where we start the price.
-billy
Trending Topics
11-09-10, 11:19 AM
#9
死*神*
iTrader: (4)
Join Date: Apr 2008
Location: Delaware
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
I got money on the 15th. as I said in my email to you before, I am swapping to a LS2 anyway so this is a needed change. I was going to save up for all your products but I can't pass this. Also as a favor would I be able to inspect the box at a later point say spring/summer? I am out of the country and it will arrive at my parents house and wait for my return. Either way, I will be getting the big brake upgrade kit for the front and various other stuff later. Thanks Shawn
Oh, that means yes, I want in. oops I get paid in two days so yes I got money in hand pretty much
Oh, that means yes, I want in. oops I get paid in two days so yes I got money in hand pretty much
11-10-10, 08:49 PM
#11
Chad Carson
iTrader: (29)
Join Date: Nov 2001
Location: South of Nashville TN. USA
Posts: 7,010
Likes: 0
Received 0 Likes
on
0 Posts
I got money on the 15th. as I said in my email to you before, I am swapping to a LS2 anyway so this is a needed change. I was going to save up for all your products but I can't pass this. Also as a favor would I be able to inspect the box at a later point say spring/summer? I am out of the country and it will arrive at my parents house and wait for my return. Either way, I will be getting the big brake upgrade kit for the front and various other stuff later. Thanks Shawn
Oh, that means yes, I want in. oops I get paid in two days so yes I got money in hand pretty much
Oh, that means yes, I want in. oops I get paid in two days so yes I got money in hand pretty much
Shawn, This is a sweet set up. My 1st gen is a sweet ride now! When you buy it from billy let me know as Im at billy house alot and real close to you.
Chad
11-11-10, 08:46 AM
#12
死*神*
iTrader: (4)
Join Date: Apr 2008
Location: Delaware
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Oh I didn't know he was that close to Campbell. Yeah, I am having everthing for my build maild to Delaware at my parents and then when I return I gotta load it all on a trailer and drive it back to campbell. I actually was going through the catalog and realized my spending there (previously $1000) is now up to $2000+ I can't wait to get home and build her. Even if I don't do the V8 swap (a small maybe) it will still handle and ride better.
11-11-10, 09:27 AM
#13
Chad Carson
iTrader: (29)
Join Date: Nov 2001
Location: South of Nashville TN. USA
Posts: 7,010
Likes: 0
Received 0 Likes
on
0 Posts
Oh I didn't know he was that close to Campbell. Yeah, I am having everthing for my build maild to Delaware at my parents and then when I return I gotta load it all on a trailer and drive it back to campbell. I actually was going through the catalog and realized my spending there (previously $1000) is now up to $2000+ I can't wait to get home and build her. Even if I don't do the V8 swap (a small maybe) it will still handle and ride better.
And yes, get back safely (Thank You for your Service), look me up, and you can drive my ReSpeed car (has 12a) to see what you will have soon.
Holla
11-13-10, 09:20 PM
#16
dark side i sense in him
Just got this set up last year! This is easily the best purchase I have made for the car yet. This is one hell of a deal to get steering and precision handling out of your car!
Man Love for Billy once again!
Man Love for Billy once again!
11-17-10, 10:21 AM
#19
UPDATED:
LIST OF PEOPLE INTERESTED -
$$ MONEY IN HAND
1) Directfreak
2) ourxseven
3) dream36realms
4) Boss Man
5) John K (already ordered)
We have 5. Do we want to give this a few weeks to see if any more show up or go ahead and move forward?
-billy
LIST OF PEOPLE INTERESTED -
$$ MONEY IN HAND
1) Directfreak
2) ourxseven
3) dream36realms
4) Boss Man
5) John K (already ordered)
We have 5. Do we want to give this a few weeks to see if any more show up or go ahead and move forward?
-billy
