Third generation TB and Upper intake on S5 TII
#1
Newbie
Thread Starter
Join Date: Jan 2004
Location: coral springs, FL
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Third generation TB and Upper intake on S5 TII
I was wondering what is the best way to add third gen intake to S5 TII. I have read that a spacer is required, since the holes don't line up. Can i buy the spacer already made or do i need to "invent" the spacer?
Any input would be greatly appreciated.
Thanks
Frank
Any input would be greatly appreciated.
Thanks
Frank
#2
Lives on the Forum
I think it's a waste of time.
You need to modify your stock oil filler neck.
You need to cut off a couple of "arms" to clear the secondary fuel injector.
You'll need to block off the unnecessary holes.
Your air bleed valve systems is screwed, becase the FD system doesn't have any fittings prior to the TB. You'll need to rig something to make this work properly.
You lose all control of the BAC, unless you rewire the plug into the stock FD one.
If you still insist on doing this, contact hIGGI about this spacer, as he's designing them.
-Ted
You need to modify your stock oil filler neck.
You need to cut off a couple of "arms" to clear the secondary fuel injector.
You'll need to block off the unnecessary holes.
Your air bleed valve systems is screwed, becase the FD system doesn't have any fittings prior to the TB. You'll need to rig something to make this work properly.
You lose all control of the BAC, unless you rewire the plug into the stock FD one.
If you still insist on doing this, contact hIGGI about this spacer, as he's designing them.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM