non running 88 n\a
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: Bradenton Fl
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
non running 88 n\a
I got an 88 n\a for an awsome deal.
But, It doesnt run. I checked for fuel and spark and I got it. I also used a piston compresion gauge and it read 45 pounds in each spark plug hole. Thats not good but it would seem the consistency of the readings in each hole would mean it should run. Right?
I also have a bad smell of gas after I try and crank it and the plugs were wet. This thing doesnt even try to crank and I dont really wana go for a new motor or a rebuild just yet. What do you guys think my next step should be?
But, It doesnt run. I checked for fuel and spark and I got it. I also used a piston compresion gauge and it read 45 pounds in each spark plug hole. Thats not good but it would seem the consistency of the readings in each hole would mean it should run. Right?
I also have a bad smell of gas after I try and crank it and the plugs were wet. This thing doesnt even try to crank and I dont really wana go for a new motor or a rebuild just yet. What do you guys think my next step should be?
Trending Topics
#10
Super Newbie
Originally posted by FPrep2ndGenRX7
Don't you have to remove the schrader valve from the compression tester to verify the needle it jumping evenlly for each rotor face while the motor is turning over?
Don't you have to remove the schrader valve from the compression tester to verify the needle it jumping evenlly for each rotor face while the motor is turning over?
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
turbo-minivan
General Rotary Tech Support
69
02-04-16 12:29 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM