Twinnos

what are the names of the pipes or piping i need to go from this look to this look

i want to get some polished pipes to replace what i got and make it look like the last pic. any help will be appreciated and also those shiny air box things.

Mahjik

iTrader: (1)

Intake piping:
http://www.rx7store.net/product_p/polishedpipekit.htm

Intercooler Piping:
http://www.rx7store.net/product_p/greddy3pcskit.htm

Efini Y-Pipe (will need it polished):
http://www.rx7store.net/product_p/efiniypipe.htm

The rest of the piping on that car is specific for the Front Mount Intercooler it is running.

Twinnos

i appreciate it, i plan on going with a FMIC setup. thanks alot.

Twinnos

also do i have to do anything special to my twin turbo setup to go from stock intercooler to the HKS FMIC on rx7store.net?

Mahjik

iTrader: (1)

The kit comes with what you need for the stock twin turbos.

Twinnos

hey mahjik thanks for your help to the newb, another question. if i get this:
http://www.rx7store.net/product_p/greddyfmic55.htm
and the greddy elbow: http://www.rx7store.net/product_p/greddyelbowflange.htm and a seperate blow off valve, then i shoud be good to go as far as not overheating, engine still performing as is or better with this setup?

Rocking Rotary

iTrader: (14)

You may want to think about upgrading the radiator if you haven't already done so. It is a must with a FMIC.

Twinnos

appreciate it, it came with a koyo radiator. so will i be good as far as overheating or any other symptons are concerned with the greddy FMIC and greddy elbow right?