help pls
 

https://i26.photobucket.com/albums/c...s772/rx7-1.jpg
what are the names of the pipes or piping i need to go from this look to this look
https://img.photobucket.com/albums/v...7/45738642.jpg
i want to get some polished pipes to replace what i got and make it look like the last pic. any help will be appreciated and also those shiny air box things. :)

Intake piping:
http://www.rx7store.net/product_p/polishedpipekit.htm

Intercooler Piping:
http://www.rx7store.net/product_p/greddy3pcskit.htm

Efini Y-Pipe (will need it polished):
http://www.rx7store.net/product_p/efiniypipe.htm

The rest of the piping on that car is specific for the Front Mount Intercooler it is running.

i appreciate it, i plan on going with a FMIC setup. thanks alot.

also do i have to do anything special to my twin turbo setup to go from stock intercooler to the HKS FMIC on rx7store.net?

The kit comes with what you need for the stock twin turbos.

hey mahjik thanks for your help to the newb, another question. if i get this:
http://www.rx7store.net/product_p/greddyfmic55.htm
and the greddy elbow: http://www.rx7store.net/product_p/greddyelbowflange.htm and a seperate blow off valve, then i shoud be good to go as far as not overheating, engine still performing as is or better with this setup?

You may want to think about upgrading the radiator if you haven't already done so. It is a must with a FMIC.

appreciate it, it came with a koyo radiator. so will i be good as far as overheating or any other symptons are concerned with the greddy FMIC and greddy elbow right?