General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

Few pre-mix ?'s

Thread Tools
 
Search this Thread
 
Old 12-13-06, 01:21 PM
  #1  
Rotary Enthusiast


Thread Starter
iTrader: (25)
 
AHarada's Avatar
 
Join Date: Sep 2006
Location: CA
Posts: 1,209
Received 10 Likes on 8 Posts
Few pre-mix ?'s

I've searched and read a lot about using 2-stroke oil in the gas tank. This brought up a few questions.

First, it is recommended that you use a ratio of 100/1 fuel to oil mix. So some suggest mixtures of roughtly 1oz. of oil to 1 gallon of fuel. So are those that put an oz. of oil in the gas tank per gallon still using the stock omp setup? I know some are disabling their omp setups all together and only running premix. If my omp setup is still operating, would it still be the same recommended mixture?

Also, would any problems occur if I use de-natured alcohol as an octane booster? I doubt it, but just want to make sure there won't be any chemical reactions or anything with the mixture.
Old 12-13-06, 01:54 PM
  #2  
burn to burn

iTrader: (3)
 
R_PROWESS's Avatar
 
Join Date: May 2005
Location: Rochester, IN
Posts: 1,672
Received 12 Likes on 11 Posts
if your omp is still in operation you would not need 100:1
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
5
09-03-15 07:10 PM
elegance
2nd Generation Specific (1986-1992)
6
07-21-04 09:23 AM
1stgen_tn
1st Generation Specific (1979-1985)
7
03-14-04 02:44 PM
1987RX7guy
2nd Generation Specific (1986-1992)
27
04-06-03 12:31 AM
Midnight Hour
General Rotary Tech Support
7
09-14-02 02:05 PM



Quick Reply: Few pre-mix ?'s



All times are GMT -5. The time now is 11:10 PM.