FC with Air/Fuel managment issues
#1
RotorHead
Thread Starter
Join Date: Apr 2010
Location: Sask
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
FC with Air/Fuel managment issues
Hey, i have a 1991 FC with 13b NA. No Engine Mods yet.
Symptoms: Wont Idle, Starts and revs up to 2k then shuts down. Temp doesn't seem to affect it. (although i have not be able to get it to proper eng temp)
Checked So far: Replaced Plugs and Wires, Checked for vacuum leaks, Tried a few different idle set screw adjustments (top of Intake Throttle housing) . Cannot figure out what sensor is to the left of the Oil Pressure sensor.
From what i have learned from other posted i am leaning towards a Air Metering Sensor.
Any idea's out there? I am going to Ohm's check the TPS this week if it ever stops raining.
Recently moved to a new city and have not found any RX7 enthusiast yet so im looking for a bit of help just to bounce idea's back and forth. These Air/Fuel management systems are like nothing i have worked on before
Symptoms: Wont Idle, Starts and revs up to 2k then shuts down. Temp doesn't seem to affect it. (although i have not be able to get it to proper eng temp)
Checked So far: Replaced Plugs and Wires, Checked for vacuum leaks, Tried a few different idle set screw adjustments (top of Intake Throttle housing) . Cannot figure out what sensor is to the left of the Oil Pressure sensor.
From what i have learned from other posted i am leaning towards a Air Metering Sensor.
Any idea's out there? I am going to Ohm's check the TPS this week if it ever stops raining.
Recently moved to a new city and have not found any RX7 enthusiast yet so im looking for a bit of help just to bounce idea's back and forth. These Air/Fuel management systems are like nothing i have worked on before
#4
RotorHead
Thread Starter
Join Date: Apr 2010
Location: Sask
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
From North Battleford. It idles rough and low when i unplug the Air meter, soon as i plug it in it revs up and dies. Air meter causing over fueling it seems.. Cannot find my style on Kijiji ,the round N350, 197200-0011 . Does anyone know of the Resistance tests that can be done?
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM