Exhaust manifold studs
#1
Full Member
Thread Starter
Exhaust manifold studs
Hey guys,
random question - does anyone know a kit or a part number for an exhaust stud that's m10x1.25 where the top part is about 40mm from the shoulder and the remaining 20mm is shoulder and then threads? I've found a lot that have the shoulder in the middle of the stud, but I need something that specific. Any Dorman or fel-pro kits would be great. This is for my exhaust manifold to a spacer plate to my single turbo.
random question - does anyone know a kit or a part number for an exhaust stud that's m10x1.25 where the top part is about 40mm from the shoulder and the remaining 20mm is shoulder and then threads? I've found a lot that have the shoulder in the middle of the stud, but I need something that specific. Any Dorman or fel-pro kits would be great. This is for my exhaust manifold to a spacer plate to my single turbo.
Last edited by extreme_rotary; 10-20-22 at 08:25 PM.
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,829
Received 2,597 Likes
on
1,845 Posts
stuff like this is kind of time consuming, for instance the Miata head to exhaust manifold studs BP8J-10-404 are M10x1.25. its 12mm on one end and 21mm on the other with the shoulder in the middle, plenty of pics on teh internets
i'm sure there is an OE part, its just finding it
i'm sure there is an OE part, its just finding it
Thread
Thread Starter
Forum
Replies
Last Post