engine wiring
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: -
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
engine wiring
all right, I'm ripping out the engine in my '90 vert, I've got an engine hoist coming thursday. I was wondering how to get the huge wire bundle - with all the connectors to the crap on the enfine - out of the engine. It seems a few connectors are under the vdi manifold and I need to take it off to get them off.. BUT one of the engine hooks is attached to it so... how do I get them out?
#2
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 2 Likes
on
2 Posts
You can either unplug the wire harness from the ECU and pull the harness through the firewall and remove it with the engine, or you can label each connector as you unplug it. Doing this means you'll have to remove the upper intake manifold because there are a few wires under there. A ground wire, the fuel injector wires, and a couple others.
#3
Senior Member
Thread Starter
Join Date: Apr 2003
Location: -
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
yeah, thats what I was trying to figure out, how to remove those few connectors without removing the manifold... oh well, looks like its coming from the ecu...
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
befarrer
Microtech
3
08-22-15 05:52 PM