Engine will turn over but not fire. please help
#1
Full Member
Thread Starter
Join Date: Aug 2006
Location: Edmonton Alberta
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Engine will turn over but not fire. please help
OK! for the life of me...
lets start here, I purchased a 1986 Rx-7 GX
from an autowreckers for 600 dollars. I am
not naieve into buying a car that is hopeless
and this is why i purchased it. It turned over,
everything and i mean everything electrical
worked in it including power side view mirrors.
All engine components were present so I
thought it would be alot! easier! than it is!.
The spark plugs were done, so I replaced them,
still not igniting. replaced the old gasoline in
the engine, replaced the fuel pump because
afterwards i checked to see if it was working,
it was not. so i paid 250 goddamn dollars for
that and it turns out the wiring to the pump
has no power. **** off, so i booster the fuel
pump with another battery. worked fine and
it actually can get the car started long enough
for it to rev up to 2000-2500 rpm and it quits.
I've come to the conclusion there may be a
break in the wire. Or possibly the Computer is
toast? very effin hoping thats not the case.
Im one step away from taking it into the dealership
but i thought i should ask here first...
any other suggestions people?
lets start here, I purchased a 1986 Rx-7 GX
from an autowreckers for 600 dollars. I am
not naieve into buying a car that is hopeless
and this is why i purchased it. It turned over,
everything and i mean everything electrical
worked in it including power side view mirrors.
All engine components were present so I
thought it would be alot! easier! than it is!.
The spark plugs were done, so I replaced them,
still not igniting. replaced the old gasoline in
the engine, replaced the fuel pump because
afterwards i checked to see if it was working,
it was not. so i paid 250 goddamn dollars for
that and it turns out the wiring to the pump
has no power. **** off, so i booster the fuel
pump with another battery. worked fine and
it actually can get the car started long enough
for it to rev up to 2000-2500 rpm and it quits.
I've come to the conclusion there may be a
break in the wire. Or possibly the Computer is
toast? very effin hoping thats not the case.
Im one step away from taking it into the dealership
but i thought i should ask here first...
any other suggestions people?
#4
Senior Member
iTrader: (2)
Join Date: Mar 2004
Location: Charlottesville, VA
Posts: 690
Likes: 0
Received 0 Likes
on
0 Posts
Sounds to me like you have a massive vacuum leak somewhere. Check the vacuum lines and the gaskets at UIM and LIM. Crank and stall usually means a lot of unmetered air is getting into the system.
#5
Full Member
Thread Starter
Join Date: Aug 2006
Location: Edmonton Alberta
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
i did post this in the second gen forum as well...lol
no way why would they do that...****!
and thank you.! some useful information
for me to try. any other possibilites?
no way why would they do that...****!
and thank you.! some useful information
for me to try. any other possibilites?
Trending Topics
#8
Junior Member
Join Date: Aug 2006
Location: california
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
if you have no power to the wires its simple get power to the wires..trace them to were ever they go and if you cant find the break/bad point while tracing them i would just replace the wires
#9
Full Member
Thread Starter
Join Date: Aug 2006
Location: Edmonton Alberta
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
replacing the wires alone doesnt guarentee anything though...ive thought of it but if its something more serious like the ecu or something then ill have to replace that
#10
Senior Member
iTrader: (5)
is the engine flooded? pull the 40AMP fuse labled for fuel injection,crank the car for like 10-15 seconds(occasionally it may actually run) then turn the car off,put the fuse back in,and turn on your car,very common problem...
verry common fix
the fuse will be in the engine bay on the right side
verry common fix
the fuse will be in the engine bay on the right side
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM
befarrer
Microtech
3
08-22-15 05:52 PM