Engine swap, now alternator problem
#1
Megasquirt in progress
Thread Starter
Join Date: Apr 2011
Location: Kelowna, BC
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Engine swap, now alternator problem
Im just finishing my NA to TII swap, ive got the TII emissions harness and computer, and NA front and engine harnesses. I have it running now, but my volts are sitting around 10 when running, when the cars off i have all 12.
I was pretty sure I had the wiring done up properly, i re-routed my black/white and white/black wires from my x-15 plug to wires on the small white plug on the emissions harness (not plugged into anything).
Anyone with a good knowledge of the whole FC x-15 x-16 plug ordeal: did i wire this properly?
anyone else, do you have any ideas?
I was pretty sure I had the wiring done up properly, i re-routed my black/white and white/black wires from my x-15 plug to wires on the small white plug on the emissions harness (not plugged into anything).
Anyone with a good knowledge of the whole FC x-15 x-16 plug ordeal: did i wire this properly?
anyone else, do you have any ideas?
#2
Teeterin on Grip & Drift
iTrader: (4)
https://www.rx7club.com/showthread.p...harness&page=1
This from Hailers post on someone else that helped me with wiring a S5 alt to my S4...
This from Hailers post on someone else that helped me with wiring a S5 alt to my S4...
#3
Megasquirt in progress
Thread Starter
Join Date: Apr 2011
Location: Kelowna, BC
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
I've got it working now, i ran my own wires straight from the alt to the x15 plug and after mixing up my w/b and b/w then replacing my alternater i finally have my 14v when running
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
blkops
3rd Generation Specific (1993-2002)
7
08-12-15 01:30 PM