sevensix

iTrader: (1)

is this still usable if i smooth down the parts warped upward(damage is at the edge of the spacer so the top and side both have damage). not sure how functional of a bearing surface this usually is against the counterweight and the inside diameter of the thrust bearing. any experts here

Rotary_Rocket_87

by no means am I an expert but when it comes to anything crutial like endplay I would replace it

sevensix

iTrader: (1)

it wouldn't effect the endplay since it is the thickness of the spacer that sets endplay. my main concern is wear it might cause to the parts in contact with it, i don't think it will.. but trying to confirm

GoodfellaFD3S

iTrader: (213)

Dude, it's 10 bucks from Ray Crowe. I can't believe you're considering it using it......

Gadd

The spacer is not a bearing surface. If it is still dimensionally correct in thickness and diameter it would be fine. But they are cheap to replace.

sevensix

iTrader: (1)

alright im getting a new one, the stuff is too hard to grind down. not worth my 30 min

thanks for the infos

680RWHP12A

+1!!!!

sevensix

iTrader: (1)

rays hooking me up, forgot what he said about the price though. it was either 9 or 12