new guy here, jus made an account today, just rebuilt my engine and got it back in the car, i need to know the location for the oil pressure sensor plug, before it was wired to an after market gauge that im not going to use, i think its off the same harness as the oil metering pump and the knock sensor, correct me if im wrong, but anyone who can help me i aould greatly appreciate it

This phot i got the single blade thats for water temp on the small blade behind the oil pressure sensor

this is the hadness in question, in my hand is the oil metering pump plug, and on my pinky is the knock sensor,

this here is what i think might be oil pressure? Its on the same harness as OMP and Kock sensor.

 

I'm sure you may have found it by now, but in any case, the Oil Pressure Sensor wire is part of the front harness, it's not part of the engine harness where the knock sensor and temperature gauge wiring is on.

If I recall correctly, it should be connected somewhere close to the starter motor wires and is grey with a red stripe.