General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

can anyone help me.....

Old Mar 21, 2004 | 06:32 PM
  #1  
sliver_undr's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 13
Likes: 0
From: kelowna b.c., canada
Unhappy can anyone help me.....

i have seemed to run into an issue............to put into a nut shell, went to go out and stat up the "ferrari" (so to speak) and it initially started up fine; about two minutes later it all of a sudden started running like it was sort of missing.....i have already done a tune-up on it so i have kinda rules out plugs,wires etc. i remove exaust from manifold thinking it might have been the cat. but it wasn't......i'm kinda torn up as to what it might be....coils,emmisions,ecu??????manual dosen't list a troubleshooting section....and would you believe mazda doesn't have a clue and there is no one in town who wants to touch it....can anybody give me some insight or possible direction.......
thnx

shawn
Reply
Old Mar 21, 2004 | 07:59 PM
  #2  
Darth Linux's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 334
Likes: 0
From: Spokane, WA
what color are the plugs . . . black, tan, wet with oil? give us some details "running like it was missing" doesn't tell us much. Is the fuel in the midline of the windows on either side of the carb?
Reply
Old Mar 22, 2004 | 12:20 AM
  #3  
sliver_undr's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 13
Likes: 0
From: kelowna b.c., canada
well the car is an 86 rx7.non turbo (fuel injected)...plugs are a dark brown/black.....fuel rail is on the passenger side.....fuel line is on the drivers side...sorry to sound ignorant but what does this have to do with the problem??? could the issue be injectors????

thnx for the reply...

shawn

p.s. car just broke 100,000 km.
might use 1/2 litre. per oil change
Reply
Old Mar 22, 2004 | 01:14 AM
  #4  
Darth Linux's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Apr 2002
Posts: 334
Likes: 0
From: Spokane, WA
the color and condition of the plugs tell you whether the engine is running the correct mixture, or not. Sounds like you are running rich, from your description. I'm more of an early RX person - I only know the carby versions of 12a engines so you'll need to keep asking, but I'd suspect that perhaps a vacuum hose has come off lately causing the bad idle.

It's really hard to tell over the internet, but sounds like it's time to check all ofyour vacuum hoses, computer codes, whatever else you can troubleshoot on an 86 NA . . .
Reply
Old Mar 22, 2004 | 11:16 AM
  #5  
sliver_undr's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Mar 2004
Posts: 13
Likes: 0
From: kelowna b.c., canada
thnx for the reply.....i'll check; i'm kinda figuring either ecu or coils but i am definetly open to anybodies suggestions or imput ( never really "tinkered" in the world of rotaries and this has been the first problem i have encountered with it).thnx aagain for the reply!!!!!

shawn
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx7jocke
20B Forum
8
Oct 6, 2014 02:51 AM
surem03
Old School and Other Rotary
23
Mar 6, 2012 08:14 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:56 AM.