omboriqua

hey, i have a 1988 mazda rx7 limited edition, 13b rotary fuel injection, auto, 128,300 miles. now the problem is that it doesnt start and last week it started perfectly. i had to press the gas halfway down for it to start, now no matter how far you press it down it doesnt start. any suggestions?

-orlando

NaKing07

does it crank you probably flooded the motor

did you take emisions out..

if so.. pull out your ecu fuse crank it for about 10 seconds and then put your ecu fuse in and crank it if that doesn't start it right up
theres a really long process with taking out the spark plugs and **** like that

never push down your gas pedal to get an rx7 started though
you'll flood the motor

if none of this **** works pop start it

omboriqua

UPDATE: i tried the ecu thing it didnt work i also did a tune up and we tried the spark plug process no luck either so we decided to switch the modified 13b in my dads convert into mine and jus keep the fuel injection on mine. im also going to get new injectors so i want some advice on brands and soldering and all that good stuff. after we do the engine swap we are gonna sell the convert so if you're interested let me know and ill post some pics and a price

EDIT: p.s. i live in wpb, fl if you are interested

Michigan_1jz

Do not use ether to start it whatever you do

RX_seven

i have da same problem, but mines 87 stick shift, ... when i bought it, it started up fine, barely drove it, n now it sits thru da cold, so i went 2 start it up, now start, it cranks, but nutthing. Thught it was da battery, gotta new battery n now it wants 2 start but it wont. Im new 2 da rotory engines, n if any1 could hep, please help. It gets 2 da point whea it wanna start but it cant.....

Michigan_1jz

speaka da ingrish...?


Check for codes! anyone throwing check engine lights?

omboriqua

i dont have a code reader and i cant take it to A parts store because it doesnt start. i have an 89 stick shift and it starts perfectly all i need is a new steel braided cable for the carb. p.s. im putting this engine in the 88' and making it fuel injection then puttin the engine that doesnt start with the carb and puttin it into 89. any advice on switching from carb to FI. thanks again

BASTARD

iTrader: (4)

all of you guys... yourselves a favor and search the second gen section for starting problems and flooding problems... also read the faq's at the top of the 2nd gen sections... it 's an eye opener... a plethora of knowledge... a cornucopia of information

josebgb90

i know this sounds silly but sometimes the floormat likes to slip under the clutch unnoticed and i thought something was wrong i tried doing the push start thing thinking the starter was done and it didnt start so i was like WTF??? then my dad came and was like hey dumbass you have to push the clutch ALLLLL the way to the FLOOR and if the floormat gets in the way it causes a big issue..so yea..try that meaby it will be much more simple than you think. or meaby it is just the started..try the floor mat thing if not take out the starter and take it to a local shop that runs tests for free on starters (ex: pep boys, auto advance etc...) send me a message if it works..