RX7Club.com - Mazda RX7 Forum
Zoom in on the legs of IC5.
Zoom in on the legs of IC5.
0 2021/12/04 00:07:22
You can clearly see the uniform impressions on the metal case.
You can clearly see the uniform impressions on the metal case.
0 2022/03/05 19:17:00
From this angle, you can see bite marks. The gouge came from a screwdriver. It pierced the case.
From this angle, you can see bite marks. The gouge came from a screwdriver. It pierced the case.
0 2022/03/05 19:18:25
You should be able to see the centering nubs.tines through the ABS Wheel Sensor bore. This causes the hexagonal shape on the case when trying to remove it.
You should be able to see the centering nubs.tines through the ABS Wheel Sensor bore. This causes the hexagonal shape on the case when trying to remove it.
0 2022/03/05 19:21:24
I tired to get a better shot of the nubs/tines. Look at all that corrosion!
I tired to get a better shot of the nubs/tines. Look at all that corrosion!
0 2022/03/05 19:23:27
Front Right ABS Wheel Speed Sensor. There is a gap at the top but hard to see.
Front Right ABS Wheel Speed Sensor. There is a gap at the top but hard to see.
0 2022/03/05 20:01:45
Better angle at the gap at the top. This is where I inserted a screwdriver to act as a wedge.
Better angle at the gap at the top. This is where I inserted a screwdriver to act as a wedge.
0 2022/03/05 20:02:46
Screwdriver wedge. Be VERY careful not to pierce the housing! Work with narrow & thin screwdrivers up to wider & thicker ones.
Screwdriver wedge. Be VERY careful not to pierce the housing! Work with narrow & thin screwdrivers up to wider & thicker ones.
0 2022/03/05 20:03:38
Here is the same hexagonal impressions left on the sensor housing as a result of the extraction.
Here is the same hexagonal impressions left on the sensor housing as a result of the extraction.
0 2022/03/05 20:04:48
Different angle of front right ABS Speed Sensor housing. The hexagonal deformations are very apparent here.
Different angle of front right ABS Speed Sensor housing. The hexagonal deformations are very apparent here.
0 2022/03/05 20:05:56
Backside of steering knuckle and ABS Wheel Speed Sensor bore. Corrosion is very evident here! The centering nubs/tines are barely visible.
Backside of steering knuckle and ABS Wheel Speed Sensor bore. Corrosion is very evident here! The centering nubs/tines are barely visible.
0 2022/03/05 20:07:00
Front Left (Driver) Side bore after cleaning with a dremel wire wheel. View is looking from the steering spindle. Rag covers spindle.
Front Left (Driver) Side bore after cleaning with a dremel wire wheel. View is looking from the steering spindle. Rag covers spindle.
0 2022/03/06 17:55:29
Front Left (Driver) side, from behind the steering knuckle. Cleaned up as much corrosion as possible. There were some tough spots in the corners but I got them!
Front Left (Driver) side, from behind the steering knuckle. Cleaned up as much corrosion as possible. There were some tough spots in the corners but I got them!
0 2022/03/06 17:57:56
Front Left (Driver) side, looking from wheel spindle (covered by rag). This is the nickel based anti-seize compound.
Front Left (Driver) side, looking from wheel spindle (covered by rag). This is the nickel based anti-seize compound.
0 2022/03/06 18:00:15
Front Left (Driver) side, from behind the steering knuckle. It looks like an excessive amount and that was after wiping most of it away.
Front Left (Driver) side, from behind the steering knuckle. It looks like an excessive amount and that was after wiping most of it away.
0 2022/03/06 18:00:19
Front Right (Passenger) Side, looking from wheel hub at dust shield and bore. You can clearly see the tines in this bore.
Front Right (Passenger) Side, looking from wheel hub at dust shield and bore. You can clearly see the tines in this bore.
0 2022/03/06 18:02:45
Front Right (Passenger) Side, from behind the steering knuckle. Couldn't get it as clean as the driver side because of poor angles with the dremel tool.
Front Right (Passenger) Side, from behind the steering knuckle. Couldn't get it as clean as the driver side because of poor angles with the dremel tool.
0 2022/03/06 18:04:12
Front Right (Passenger) Side, looking from wheel hub at dust shield and bore. Nearly the same photo as before but with anti-seize compound applied.
Front Right (Passenger) Side, looking from wheel hub at dust shield and bore. Nearly the same photo as before but with anti-seize compound applied.
0 2022/03/06 18:05:24
Front Right (Passenger) Side, from behind the steering knuckle. Anti-seize applied to area including the screw holes.
Front Right (Passenger) Side, from behind the steering knuckle. Anti-seize applied to area including the screw holes.
0 2022/03/06 18:05:29
Replaces 3rd photo from Post #xx
Replaces 3rd photo from Post #xx
0 2022/03/06 18:16:47
Special Tools required for Ball Joint Dust Boot Clip installation.
Special Tools required for Ball Joint Dust Boot Clip installation.
0 2022/03/13 18:32:58
Ball Joint Dust Boot Clip installation procedure.
Ball Joint Dust Boot Clip installation procedure.
0 2022/03/13 18:33:33
These solder joints are new when compared to the rest on the board. The components above were replaced before.
These solder joints are new when compared to the rest on the board. The components above were replaced before.
0 2018/02/01 21:07:29
I suspect this capacitor, C1, was previously replaced. What are the values stamped on the capacitor? It should be 1uF @ 50V.
I suspect this capacitor, C1, was previously replaced. What are the values stamped on the capacitor? It should be 1uF @ 50V.
0 2018/03/18 19:06:44
Flex Print Schematic
Flex Print Schematic
0 2018/05/08 14:22:45
0 2018/05/08 18:59:08
0 2018/05/09 12:24:09
0 2018/05/09 12:24:09
0 2018/05/15 17:50:04
0 2018/05/27 20:56:25
0 2018/05/27 20:59:53
0 2018/05/27 21:00:29
0 2018/07/24 10:36:57
Note on BEM Pg S-8
Note on BEM Pg S-8
0 2019/01/02 12:54:16
Hot Wheels Mazda 787B (front)
Hot Wheels Mazda 787B (front)
0 2019/01/29 21:02:55
Hot Wheels Mazda 787B (back)
Hot Wheels Mazda 787B (back)
0 2019/01/29 21:03:59
Hot Wheels FB
Hot Wheels FB
0 2019/01/29 21:19:20