RX7Club.com - Mazda RX7 Forum
C1 is a 1uF, 50V capacitor.
C1 is a 1uF, 50V capacitor.
0 2017/03/17 08:13:13
Old and torn boot on Positive terminal. Disconnect battery and remove.
Old and torn boot on Positive terminal. Disconnect battery and remove.
0 2020/04/12 17:35:56
Fuse block cover removed and right side bolts (2-10mm bolts) removed.
Fuse block cover removed and right side bolts (2-10mm bolts) removed.
0 2020/04/12 17:36:59
Tachometer motor
Tachometer motor
0 2017/03/17 08:13:14
Left side bolts (2-10mm bolts) removed and terminal blade moved away.
Left side bolts (2-10mm bolts) removed and terminal blade moved away.
0 2020/04/12 17:37:01
C3 removed. The negative lead hole (on the left) looks a bit tarnished from the original cap leaking.
C3 removed. The negative lead hole (on the left) looks a bit tarnished from the original cap leaking.
0 2017/03/17 13:18:43
Here is C3 soldered back in place. I ensured solder was on the top side as well. This remove and reinstall did not fix the odometer.
Here is C3 soldered back in place. I ensured solder was on the top side as well. This remove and reinstall did not fix the odometer.
0 2017/03/17 13:18:45
Fuse block rotated 90* counter-clockwise to reveal the locking tabs. Press and pull the 1-pin connector.
Fuse block rotated 90* counter-clockwise to reveal the locking tabs. Press and pull the 1-pin connector.
0 2020/04/12 17:37:03
Red cap points to the solder joint of ZD4. Note its separation from ZD5 and ZD7's solder joints. It is normal for the solder joints of ZD5 & ZD7 to touch. They share the same electrical connection.
Red cap points to the solder joint of ZD4. Note its separation from ZD5 and ZD7's solder joints. It is normal for the solder joints of ZD5 & ZD7 to touch. They share the same electrical connection.
0 2017/03/21 08:11:12
Fuse block rotated 90* counter-clockwise. Press and pull the 3-pin connector out.
Fuse block rotated 90* counter-clockwise. Press and pull the 3-pin connector out.
0 2020/04/12 17:37:04
It doesn't take long to put each 45* bend in each lead.
It doesn't take long to put each 45* bend in each lead.
0 2017/03/21 13:32:54
Fuse block removed from car.
Fuse block removed from car.
0 2020/04/12 17:37:05
Positive battery terminal extension chocked in a vise. USE CAUTION when applying torque to remove 12mm bolt!
Positive battery terminal extension chocked in a vise. USE CAUTION when applying torque to remove 12mm bolt!
0 2020/04/12 17:37:07
Terminal blade removed and old boot removed. Note the narrow black access cover is open.
Terminal blade removed and old boot removed. Note the narrow black access cover is open.
0 2020/04/12 17:41:52
Side by side comparison between the OEM boot at JP3 Motorsports boot.
Side by side comparison between the OEM boot at JP3 Motorsports boot.
0 2020/04/12 17:41:53
JP3 Motorsports boot partially installed on terminal blade. Note the narrow black access cover is still open.
JP3 Motorsports boot partially installed on terminal blade. Note the narrow black access cover is still open.
0 2020/04/12 17:41:54
JP3 Motorsports boot positioned over the terminal blade. Note the "side" opening.
JP3 Motorsports boot positioned over the terminal blade. Note the "side" opening.
0 2020/04/12 17:45:14
The terminal blade and boot placed into the fuse block. Narrow black access cover still open.
The terminal blade and boot placed into the fuse block. Narrow black access cover still open.
0 2020/04/12 17:45:15
All 4 10mm bolts reconnected to the fuse block. New boot open to reveal the positive battery terminal.
All 4 10mm bolts reconnected to the fuse block. New boot open to reveal the positive battery terminal.
0 2020/04/12 17:45:18
Positive battery terminal extension installed and boot fitted around the angled housing of the fuse block. The "side" opening goes through this section.
Positive battery terminal extension installed and boot fitted around the angled housing of the fuse block. The "side" opening goes through this section.
0 2020/04/12 17:45:17
New boot in place and the fuse block is standing by for the battery to be reinstalled.
New boot in place and the fuse block is standing by for the battery to be reinstalled.
0 2020/04/12 17:45:20
Highlights capacitors that must be replaced.
Highlights capacitors that must be replaced.
0 2020/04/28 16:39:44
Test Thingamabobber (Not for sale)
Test Thingamabobber (Not for sale)
0 2020/04/29 08:25:41
Widget A (not for sale)
Widget A (not for sale)
0 2020/04/29 08:32:19
This is only a test.
This is only a test.
0 2020/04/29 08:33:30
Widget C not for sale. Test only.
Widget C not for sale. Test only.
0 2020/04/29 08:35:07
Sample photo.
Sample photo.
0 2020/04/29 08:35:47
Clean these areas again with isopropyl alcohol and a soft tooth brush.
Clean these areas again with isopropyl alcohol and a soft tooth brush.
0 2020/05/02 20:41:25
Please take zoom-in photos of these components.
Please take zoom-in photos of these components.
0 2020/05/02 20:46:09
Example of acid brush.
Example of acid brush.
0 2020/05/03 10:59:04
New Tenure Badges
New Tenure Badges
0 2020/05/13 11:15:43
0 2020/06/02 10:07:27
0 2020/09/23 12:48:26
0 2020/09/23 12:49:43
0 2020/09/23 12:51:02
0 2020/11/16 16:45:32
0 2020/11/16 16:45:36
Updated Veteran Banners, effective 20 Nov 2020.
Updated Veteran Banners, effective 20 Nov 2020.
0 2020/11/21 12:35:05
Reserve and National Guard Banner additions
Reserve and National Guard Banner additions
0 2020/11/21 12:42:36
New Canadian Forces veteran banner.
New Canadian Forces veteran banner.
0 2021/04/14 14:38:09