Does anyone know the size belt I need for Greddy Alt/WP with Pettit Power Pulley and No airpump. I find it on Gotham Racing website but it doesent say the size and its $35. Surely I can get it locally for cheaper.

Thanx
Jeremy

 

im not 100% sure but it mite b 5050310

 

I could only find a 28.5" belt local in my area. It fits but its snug. A 29" belt would probably fit better if you can local one.

 

29.5 for me with no airpump and stock pullies

 

I was thinking it was a 29" But I cant find it local in a 5 rib only 4 rib. The one that came with the greddy kit is a 31" which would be a 5050310 and its deffinitly too long. Looks like ill be getting it from Gotham. Sheet I really didnt want to pay 35 for a belt that probably should cost 5-10

Thanx Guys
L8r

 

I run a 4 rib...I have been running it no problem for a couple thousand miles

 

Here is what you need ....Mr. Fuller, we offer a 6 ribbed belt that is 29.5" in length--the Dayco part is 5060295.


This belt is a 6 rib. But you can EASILY trim one rib off with scirrors and you are in business. Get it at your local Advance auto - a LOT cheaper than $35. I have some pics to post later on this subject


Tom

 

4-rib is fine. Many people run a 4-rib (including me).

 

We have the 5-Rib belts available.


http://www.banzairacing.net/index_belts.htm