GB Interest: Rotary Run Racing Headlights!!!
--256166.jpg)
--256148.jpg)
--81404.jpg)
--81087.jpg)
Thread Starter
Registered User
iTrader: (61)
Joined: Apr 2004
Posts: 7,334
Likes: 8
From: Los Angeles, CA
This is still in early development, but anything is possible; we will definitely be looking into modifying the bracket/lights so you dont have to cut the frame. This is NOT like the amemiya kit where you need to cut 3 or 4 inches into the frame; it is less then 1" of cutting and I would have no problem going back to stock lights if I wanted to.
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
Fog light? Does that not use seperate low and high beam lights? If it uses a dual beam and fog lights, please clarify. I am a maybe. I love the kit but would like it modernized. Would at the least like projector if not HID. Since a new mold will be made then with some more initial effort the holes can be widened or shrunk and the brakcets modified.
I love the new RE-A headlight kit but I beleive it on'y works with the wide body kit. Notice they modernized it with the winker lights. I'm not sure if that can be done or if anyone even wants that added to the RR kit.
Oh btw, that pic above with the Run Racing hood is the San Fransisco Dentist's car. I beleive he had the first set in the US. He was at the Endless booth at sevenstock years ago.
I love the new RE-A headlight kit but I beleive it on'y works with the wide body kit. Notice they modernized it with the winker lights. I'm not sure if that can be done or if anyone even wants that added to the RR kit.
Oh btw, that pic above with the Run Racing hood is the San Fransisco Dentist's car. I beleive he had the first set in the US. He was at the Endless booth at sevenstock years ago.
Last edited by GoRacer; Nov 12, 2008 at 08:16 PM.
and lower your car more it looks sweet
Thread Starter
Registered User
iTrader: (61)
Joined: Apr 2004
Posts: 7,334
Likes: 8
From: Los Angeles, CA
Fog light? Does that not use seperate low and high beam lights? If it uses a dual beam and fog lights, please clarify. I am a maybe. I love the kit but would like it modernized. Would at the least like projector if not HID. Since a new mold will be made then with some more initial effort the holes can be widened or shrunk and the brakcets modified.
Oh btw, that pic above with the Run Racing hood is the San Fransisco Dentist's car. I beleive he had the first set in the US. He was at the Endless booth at sevenstock years ago.
Oh btw, that pic above with the Run Racing hood is the San Fransisco Dentist's car. I beleive he had the first set in the US. He was at the Endless booth at sevenstock years ago.
Joined: Oct 2001
Posts: 4,772
Likes: 2
From: My 350Z Roadster kicks my RX7's butt
^ So the HID will be dual beam then? I already have some Hella mini HID fog's i've never mounted.
I was going to sugest that the low beam can be a Hella 50mm, which can be either centered or placed higher so the top line matches the top line of the larger inside high beam. I don't know if it will help with the light pattern, but it should help with the clerance with the brackets in the back. The high beam could be a projector with a regular bulb. I beleive the projectors have a narrower beam and a regular buld would keep the cost down.
I was going to sugest that the low beam can be a Hella 50mm, which can be either centered or placed higher so the top line matches the top line of the larger inside high beam. I don't know if it will help with the light pattern, but it should help with the clerance with the brackets in the back. The high beam could be a projector with a regular bulb. I beleive the projectors have a narrower beam and a regular buld would keep the cost down.
Thread Starter
Registered User
iTrader: (61)
Joined: Apr 2004
Posts: 7,334
Likes: 8
From: Los Angeles, CA
Production wont begin till January at the earliest. I need this to drive back home with in December. When I get back in early January then I will take everything apart and begin production. I also need to meet with Ramy and finalize everything. This thread has close to a thousand views and a lot of people interested so I can definitely see this being produced.