FDNewbie Imports looking for help!
#1
FDNewbie Imports looking for help!
So, as most of you know, I no longer have BlueRex on board, and as such, need some help staying on top of everything. I've gotten a few offers to help out via PM, but figured I'd wait & see how things go. So yea, I could def. use another hand. So here's what I'm looking for...
- Need someone who's been on the forum for a while. Trust & reputation are key, because HOW we deal w/ our customers is paramount @ FDNewbie Imports
- Need someone who's very patient & understanding, even w/ the most demanding (and often annoying haha) of customers...as most ppl do not read the instructions we provide on the forum
- Need someone who has time to stay up-to-date on the latest forum issues (be it complete/incomplete orders, inquiries, etc), and can deal w/ the small stuff and provide me w/ a concise list of the big stuff that requires my attention
- Need someone good w/ math to essentially run the GBs (posting payment info, following up on & tracking payments, shipping costs, etc).
So what's the pay? This is a part-time gig for me, something I do as a passion on the side, NOT a primary job - so it isn't going to be your primary job either. This isn't a salaried or by-the-hour job; we divide the profit from the GBs you run/handle based on a previously agreed upon percentage, w/ additional services on a "contracted" rate. So basically it's great for making extra "pocket/parts money," but nothing to live off of.
That's what I have off the top of my head. I'll update this initial post w/ what I need/am looking for as necessary. Not sure what I'm looking for in terms of replies, but I guess at minimum I wanna know who's interested - and if you have any specific points/ideas you'd like to share, I'm all ears.
Thanks,
~Ramy
FDNewbie Imports
PS: If I can ever finally get the website completed and up & live, I'll still need help, but it will be much less time-intensive
- Need someone who's been on the forum for a while. Trust & reputation are key, because HOW we deal w/ our customers is paramount @ FDNewbie Imports
- Need someone who's very patient & understanding, even w/ the most demanding (and often annoying haha) of customers...as most ppl do not read the instructions we provide on the forum
- Need someone who has time to stay up-to-date on the latest forum issues (be it complete/incomplete orders, inquiries, etc), and can deal w/ the small stuff and provide me w/ a concise list of the big stuff that requires my attention
- Need someone good w/ math to essentially run the GBs (posting payment info, following up on & tracking payments, shipping costs, etc).
So what's the pay? This is a part-time gig for me, something I do as a passion on the side, NOT a primary job - so it isn't going to be your primary job either. This isn't a salaried or by-the-hour job; we divide the profit from the GBs you run/handle based on a previously agreed upon percentage, w/ additional services on a "contracted" rate. So basically it's great for making extra "pocket/parts money," but nothing to live off of.
That's what I have off the top of my head. I'll update this initial post w/ what I need/am looking for as necessary. Not sure what I'm looking for in terms of replies, but I guess at minimum I wanna know who's interested - and if you have any specific points/ideas you'd like to share, I'm all ears.
Thanks,
~Ramy
FDNewbie Imports
PS: If I can ever finally get the website completed and up & live, I'll still need help, but it will be much less time-intensive
#2
Nearing Completion...
iTrader: (473)
Join Date: Aug 2006
Location: Chicago
Posts: 4,735
Likes: 0
Received 0 Likes
on
0 Posts
Ramy, well I might be interested and I seem to fulfill your critera. If you're interested, let me know specifics, especially *time*. Pay isn't my top priority, experience and knowledge are though. I think this would actually be a good opportunity. Hit me up if you'd like...
#6
Registered User
iTrader: (61)
I might be interested in helping; plus I live 5 minutes away from you. My reputation is spotless and unlike clamps I am good with numbers/math/finance major. I also come here several times through-out the day. Besides we will be together depending on how this headlight thing works out. I also know html, photoshop and dreamweaver and could help out with the website. I am the sole founder and designer of http://www.wallstreetforbeginners.com which is still under construction but you can get a basic idea of my skills.Here are some people who can vouch for me:
https://www.rx7club.com/showthread.p...hlight=purerx7
7 BOUND – apexi n1 duals
herblenny – feed side skirts
Fritz Flynn – misc interior bits and mirror
ctribb01 – Rear Bumper
SD93FD3S – Greddy Elbow
rx7_88turbo2 – blitz dd bov
7's in Heaven – Defi Boost Gauge
revsteve-feed strut bar
trekmtbr89 – Y-pipe and crossover
Hector813 – hks bov
Mahjik – HKS Carbon Ti exhaust
RE-Amemiya – feed door handles
TK7 – EBC and intake
Northern7- Greddy Hard pipes
5252 – Apexi GT Spex exhaust
7passu – pettit pod
Iamrobbyah – efini y pipe
jdmrxluver – shift plate
OneBadFox – APEXi side skirts
ulost2my7 – TB / rear sub divider
AzEKnightz - Defi link controller
Touge Monster – Turbo xs rfl
FD REY – Drivers Side Window Switch
turbodrx7 – DIN bin
car hugger – Alpine Head unit
bucsballsi- turbo xs rfl bov
NuTbAgSaN- Apexi Intake
travisorus rex – Cwest Rear bumper / R-Magic Fenders
bthomas16 – Gauge Pod
jjdeuel2003 – Polished TB and UIM
oorx7 – cf tailcover
zkeller – gauge pod
rotorypolo – hks intake
recon fd – foglights
RSOkinawa-ipod
flyboyjuge – vertical doors
IanS – Orion 4002
zonblitz – window switch
Taikutsu – headlights
Josh T – front bumper
Johgar – smoked turn signal
JonesMechanical- feed front
Hashiriya – rotary run headlights
Rotarytard – luggage cover
JOSH FRANCO – bose wave
TurboLumpy – sony head unit
turb0x2 – taillight, franks pod
jxl914 – cassette player
Tanabe – stereo piece
rx7gooma- hks pipes
lane_change – exhaust
dennnnis-UIM
Eternal_Gamer – fd wheels
willjs7
slow_2ed_gen
RotaryBuddha
Gringo Grande
https://www.rx7club.com/showthread.p...hlight=purerx7
7 BOUND – apexi n1 duals
herblenny – feed side skirts
Fritz Flynn – misc interior bits and mirror
ctribb01 – Rear Bumper
SD93FD3S – Greddy Elbow
rx7_88turbo2 – blitz dd bov
7's in Heaven – Defi Boost Gauge
revsteve-feed strut bar
trekmtbr89 – Y-pipe and crossover
Hector813 – hks bov
Mahjik – HKS Carbon Ti exhaust
RE-Amemiya – feed door handles
TK7 – EBC and intake
Northern7- Greddy Hard pipes
5252 – Apexi GT Spex exhaust
7passu – pettit pod
Iamrobbyah – efini y pipe
jdmrxluver – shift plate
OneBadFox – APEXi side skirts
ulost2my7 – TB / rear sub divider
AzEKnightz - Defi link controller
Touge Monster – Turbo xs rfl
FD REY – Drivers Side Window Switch
turbodrx7 – DIN bin
car hugger – Alpine Head unit
bucsballsi- turbo xs rfl bov
NuTbAgSaN- Apexi Intake
travisorus rex – Cwest Rear bumper / R-Magic Fenders
bthomas16 – Gauge Pod
jjdeuel2003 – Polished TB and UIM
oorx7 – cf tailcover
zkeller – gauge pod
rotorypolo – hks intake
recon fd – foglights
RSOkinawa-ipod
flyboyjuge – vertical doors
IanS – Orion 4002
zonblitz – window switch
Taikutsu – headlights
Josh T – front bumper
Johgar – smoked turn signal
JonesMechanical- feed front
Hashiriya – rotary run headlights
Rotarytard – luggage cover
JOSH FRANCO – bose wave
TurboLumpy – sony head unit
turb0x2 – taillight, franks pod
jxl914 – cassette player
Tanabe – stereo piece
rx7gooma- hks pipes
lane_change – exhaust
dennnnis-UIM
Eternal_Gamer – fd wheels
willjs7
slow_2ed_gen
RotaryBuddha
Gringo Grande
Last edited by purerx7; 11-10-08 at 02:41 PM.
#7
Original Gangster/Rotary!
iTrader: (213)
Being that I've been interviewing for positions within my company recently, some advice I'd like to give:
if you're truly interested, than provide Ramy with your qualifications and reasons why you think you'd be an asset to his company, via PM or otherwise.
Hell, maybe I'll email Rambo my resume.....I majored in Math way back in college
if you're truly interested, than provide Ramy with your qualifications and reasons why you think you'd be an asset to his company, via PM or otherwise.
Hell, maybe I'll email Rambo my resume.....I majored in Math way back in college
Trending Topics
#15
Passenger
Location: So. CaL
Posts: n/a
hey ramy!! i'd be willing to help as well. pay is not a huge concern and i'd really consider working strictly for "employee discounts". i'm on rx7club 5-6 days of the week on average and am ready and willing to learn on how to do better business via internet. i have to admit, i am a fan of your work and i honestly dream of doing the same type of business.... acquiring the best of the best RX7 parts (not just car parts) and making them available to the growing community.
the downside is that i can't receive any PM's on this SN, but come new years, i will make another one LOL
if you'd like to contact me personally, feel free to email me at jspec13b@yahoo.com
sincerely,
Marc
Thread
Thread Starter
Forum
Replies
Last Post