Apologies for the request but i am trying to be resourceful. I recently posted the following tread;

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/anyone-comtec-betime-328-a-603887/

The device mentioned is one that came with my import. Rather than replace it i wanted to get an understanding of its capabilities as no manual was provided. I have searched on a number of searches and came accross this company that seems to have a similar named range and also the company name is printed in the same font on the device.
www.e-comtec.co.jp/
I have tried translating the website but i am unable to find a contact e-mail at least to enquire.

I would much appriciate if i can be helped whether an e-mail is provided or a location for a pdf regarding the device.

I can post pics of it if required.

Thanking you in advance.

Regards,
H

 

Comtech doesnt seem to sell any turbo timers. They sell radar detectors which would most likely be useless for you in England, they sell security systems which have remote starters which may be why you thought it could be a turbo timer, and they have car navigation and media systems.

That device is not doing anything for performance on your car and most likely doesnt do anything else since it is out of the Japan region. If you can post a pic of it I am sure I can tell you what it is. I could not find that exact product number on their site though.

Tom

 

ok the 328 was the old model.

It has been replaced with the A-73.

It is a remote starter system but if you dont have the remote then sounds like you are out of luck. However it does have a turbo timer function built into it.
The A in the A-73 stands for "answer back system".
If it is working as a turbo timer right now and you dont want to replace it with another turbo timer I say just leave it.

here is a link to the page with pics and information on the A-73. It is near the bottom.

http://www.e-comtec.co.jp/starter.html#foot

 

Thank you very much Tom.

Ill post the pics so that you can see. As it seems to have a function to operate two turbos. It would be great if i could track down a pdf doc for it or som instructions.

Thanks again.

 

Sorry for thr delay here are the pics apologies for the quality.