Problems with idle, shifting
02-19-03, 04:58 AM
#1
Newbie
Thread Starter
Join Date: Feb 2003
Location: Okinawa, Japan
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Problems with idle, shifting
1990 RX-7 "japanese model" Idles high, shift into drive, idle goes down to 250 rpm if the a/c is on, it stalls. Exhaust is hot " creates smoke inside car. tranny is out of an 1988, electrics are different, but the car atleast moves now. any info would really help. I live in Japan, and the language barrier doesn't help me a bit.
02-19-03, 10:10 AM
#2
Former Moderator. RIP Icemark.
BAC valve is bad or dirty.
Smoke inside and extra heat would indicate that the shifter inner and outer seals are torn. Replace "J" and possibly "C" in the picture:
Smoke inside and extra heat would indicate that the shifter inner and outer seals are torn. Replace "J" and possibly "C" in the picture:
02-23-03, 11:56 PM
#3
Newbie
Thread Starter
Join Date: Feb 2003
Location: Okinawa, Japan
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Thank you, already cleaned and ohmed out the BAC, its good. The smoke is coming from stuff melting cause of the hot exhaust, just wondered if someone knew alittle about the idle. Thank you for the help
Thread
Thread Starter
Forum
Replies
Last Post