In need Wolf3D 4.1 base map for 13BT
09-13-02, 02:14 PM
#3
Newbie
Thread Starter
Join Date: Apr 2002
Location: Virginia, US
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
V3 map and V4 map not the same format
However, you could help me alot if you are able to get me the map points since I can scale down the resolution and just type them in manually.
09-13-02, 02:53 PM
#6
Newbie
Thread Starter
Join Date: Apr 2002
Location: Virginia, US
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
well, here are my specs
I dont expect the map to be perfect, just something better to work with that the one that comes with it (nothing btw) ..
1991 T2 Big street port GTX
Stock turbo
550x2 Pri
850x2 Sec
HKS FMIC kit and BOV
Denso 3 rotor FP
RRFPR (not installed yet)
RB Full Exhaust
Wolf3D 4.1 (dealer edition)
Cool thing about this new Wolf I got is I can use an unmodified CAS
-Ray
1991 T2 Big street port GTX
Stock turbo
550x2 Pri
850x2 Sec
HKS FMIC kit and BOV
Denso 3 rotor FP
RRFPR (not installed yet)
RB Full Exhaust
Wolf3D 4.1 (dealer edition)
Cool thing about this new Wolf I got is I can use an unmodified CAS
-Ray
09-13-02, 07:16 PM
#7
Map Stuff
Ok. Hopefully this will help you out.
Engine: S5 13bt
Injectors: 720/1600. So im pushing more fuel than you. Running on the rich side overall.
KKK Stage 1, FMIC, SX Fuel pump etc etc.
BTW, all this info will self-destruct in 5 seconds, lol
[IMG]C:\WINDOWS\DESKTOP\Info.jpg[/IMG]
Engine: S5 13bt
Injectors: 720/1600. So im pushing more fuel than you. Running on the rich side overall.
KKK Stage 1, FMIC, SX Fuel pump etc etc.
BTW, all this info will self-destruct in 5 seconds, lol
[IMG]C:\WINDOWS\DESKTOP\Info.jpg[/IMG]
Last edited by eViLRotor; 09-13-02 at 07:20 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
danielbradley2
3rd Generation Specific (1993-2002)
11
09-28-15 10:44 PM
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM
befarrer
Adaptronic Engine Mgmt - AUS
3
09-22-15 09:33 AM
