RX7Club.com - Mazda RX7 Forum

Engine Management Forum Use this area for discussing Haltech, Wolf 3D, Power FC, AEM and any other aftermarket ECU upgrades. Help/Questions/Tuning

EFI Max to 17 Psi of boost workaround???

   
Old Sep 15, 2002 | 11:11 PM
Share
  #1  
Sarge's Avatar
Sarge
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: May 2002
Posts: 482
Likes: 0
From: Highway to Heaven between BeanTown & OTown
EFI Max to 17 Psi of boost workaround???
Is there a work around to the 17 Psi of boost for the EFI system???
Reply
0
Old Sep 22, 2002 | 11:33 PM
Share
  #2  
Wade's Avatar
Wade
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 610
Likes: 0
From: Charleston, WV
What specific issue with 17 psi do you mean?

You could just use one program specifically for 17 psi and tune it for that. It wouldn't be optimal at 15psi (boost table max) but it wouldn't hurt anything.

Wade
Reply
0
Old Sep 23, 2002 | 12:10 AM
Share
  #3  
AJatx's Avatar
AJatx
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2001
Posts: 591
Likes: 0
If you use an aftermarket EMS, I don't see why you couldn't use an aftermarket bar sensor (3 bar GM sensor). That sensor will be good for about 30psi of boost.

J
Reply
0
Old Sep 25, 2002 | 11:10 PM
Share
  #4  
Badog's Avatar
Badog
Banned. I got OWNED!!!
 
Joined: Mar 2001
Posts: 1,008
Likes: 0
From: Bannished
Less than 30psi...stock is a 2 bar...
Reply
0
Old Sep 26, 2002 | 11:43 PM
Share
  #5  
AJatx's Avatar
AJatx
Senior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Apr 2001
Posts: 591
Likes: 0
1 bar ~= 14.7 psi of pressure
2 bar of gauge pressure ~= 29.4 psi

"About 30psi" mr. technical
heheh sticklers

J
Reply
0
Old Sep 27, 2002 | 12:04 PM
Share
  #6  
Wade's Avatar
Wade
Senior Member
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 610
Likes: 0
From: Charleston, WV
Can't use a 3 bar MAP sensor with the PMS.

Wade
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
New Greddy Profec Install problem, 12psi on OFF
24seven_dada
3rd Generation Specific (1993-2002)
20
Nov 10, 2018 12:03 PM
hogged out vs boost prepped (Nikki)
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Inspect your aftermarket fuel pressure regulator!
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
Power FC Won't boost past 8psi s5 power fc
High_Carb_Diet
Power FC Forum
1
Sep 5, 2015 09:07 AM
Tags
Back to Subforum
Engine Management Forum
View Next Unread
ECU modification


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 09:10 AM.