ECU modification
09-27-02, 01:36 PM
#1
Rotary Enthusiast
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Chicago, IL
Posts: 1,462
Likes: 0
Received 0 Likes
on
0 Posts
ECU modification
I have a 1993 rx7 that has had an engine fire. In the fire the main wiring harness that connects to the ecu was badly buried along with the emission contol parts.
I have heard that I can rum a haltec ecu and harness to the engine. THis will eliminate the need for the emission controls, which I do not want to have to run or buy.
And also what system would be the best. I am looking in to adding a single turbo conversion in the future. So I want something that will be able to work with the twin turbos that I have now and then beable to handle a t 78 or gt 35/40 with a steet ported engine. Any suggestions or comments will be greatly appreciated.
Thanks
Edan
I have heard that I can rum a haltec ecu and harness to the engine. THis will eliminate the need for the emission controls, which I do not want to have to run or buy.
And also what system would be the best. I am looking in to adding a single turbo conversion in the future. So I want something that will be able to work with the twin turbos that I have now and then beable to handle a t 78 or gt 35/40 with a steet ported engine. Any suggestions or comments will be greatly appreciated.
Thanks
Edan
Thread
Thread Starter
Forum
Replies
Last Post