Autronic, Fastest MPH ....
#1
Banned. I got OWNED!!!
Thread Starter
Autronic, Fastest MPH ....
For you guys out there who like to give me a hard time about ECU choices go get the latest copy of Zoom.
Paul Murrays RX3 13BT no tubs, no modified guards 8.5"wide slick 9.0sec @ 159 Mph ! Autronic ECU......stick that in your pipe and smoke it !
People like to brag about race results, then here is one for Autronic, none quicker in Australia PERIOD !
You guys who want results, there is no argument now.
Paul Murrays RX3 13BT no tubs, no modified guards 8.5"wide slick 9.0sec @ 159 Mph ! Autronic ECU......stick that in your pipe and smoke it !
People like to brag about race results, then here is one for Autronic, none quicker in Australia PERIOD !
You guys who want results, there is no argument now.
Last edited by RICE RACING; 05-10-02 at 07:59 AM.
#2
Rotary Enthusiast
Join Date: Feb 2001
Location: The First State
Posts: 1,375
Likes: 0
Received 0 Likes
on
0 Posts
Uh Oh, i see the drama comming already. That is an excellent time. I have no biased opinions to share. I think that someone that knows an autronic unit well can tune a car and make hp and run grat time as someone who is familiar with the Haltech or any other system.
#3
Banned. I got OWNED!!!
Thread Starter
As I have been told many times by the latest influx of certain people to this forum, You cannot argue with results !
Well Autronic holds the record now ****, and to make it even more special this is the FIRST attempt done without ALL the amount of people and experts that other "famous" Australian rotary ECU has ! SIMPLY AMAZING RESULT
This gives me a certain amount of pleasure, and shoots down MANY of the BS arguments we have had the unfortunate pleasure of reading about latley from certain people.
As Greg said, get a world class ECU and a good tuner and the results will follow.
If I were as simple minded or biased as others I would come out and say that "Autronic are simply better than Micro*#@! based on this result", But I will not resort to that.
Well Autronic holds the record now ****, and to make it even more special this is the FIRST attempt done without ALL the amount of people and experts that other "famous" Australian rotary ECU has ! SIMPLY AMAZING RESULT
This gives me a certain amount of pleasure, and shoots down MANY of the BS arguments we have had the unfortunate pleasure of reading about latley from certain people.
As Greg said, get a world class ECU and a good tuner and the results will follow.
If I were as simple minded or biased as others I would come out and say that "Autronic are simply better than Micro*#@! based on this result", But I will not resort to that.
#4
I wish I was driving!
Seems like trolling to me...
https://www.rx7club.com/forum/showth...threadid=73842
https://www.rx7club.com/forum/showth...threadid=73842
#6
I agree that this is a pretty amazing effort for a "first attempt" to quote you.
But just remember, one wave doesn't make a set, so although this is a very good result the reproduction of results on other cars over the next few years will guarantee that Autronic tuners and cars maybe held in the same breath as high profile microtech tuners and cars that have been consistently pumping out fast cars for years.
Once again i would like to say it is a great effort, just more of it needs to be produced to show others they are a threat!!!
But just remember, one wave doesn't make a set, so although this is a very good result the reproduction of results on other cars over the next few years will guarantee that Autronic tuners and cars maybe held in the same breath as high profile microtech tuners and cars that have been consistently pumping out fast cars for years.
Once again i would like to say it is a great effort, just more of it needs to be produced to show others they are a threat!!!
#7
Banned. I got OWNED!!!
Thread Starter
Originally posted by RXE13B
I agree that this is a pretty amazing effort for a "first attempt" to quote you.
But just remember, one wave doesn't make a set, so although this is a very good result the reproduction of results on other cars over the next few years will guarantee that Autronic tuners and cars maybe held in the same breath as high profile microtech tuners and cars that have been consistently pumping out fast cars for years.
Once again i would like to say it is a great effort, just more of it needs to be produced to show others they are a threat!!!
I agree that this is a pretty amazing effort for a "first attempt" to quote you.
But just remember, one wave doesn't make a set, so although this is a very good result the reproduction of results on other cars over the next few years will guarantee that Autronic tuners and cars maybe held in the same breath as high profile microtech tuners and cars that have been consistently pumping out fast cars for years.
Once again i would like to say it is a great effort, just more of it needs to be produced to show others they are a threat!!!
Well the doubters have been proven wrong in fantastic fashion ! , and it did not take an army of "notable" people to do it either.
You gotta remember Autronic have been pumping out lots of super fast cars in other catagories, now they are proving it in drag racing. Imagine the results if these "big noting" tuners switched to a high end ECU such as the Autronic or MoTeC...enough said
I have known about this ECU's ability for a long time, it looks as though others will follow suit with similar quality units in that particular field of motorsport (i.e drag racing) I wonder if Paul would consider using a Micro*$%@...I highly doubt it
Trending Topics
#8
I wish I was driving!
I just have one question. If someone else gets a higher mph using a different ECU, are you gonna come back on here and start saying, "Autotronic sucks, and here is Proof! Brand XXX ran a higher mph." ?
#9
Rice,
Paul Murray happens to be a long time and good friend of mine and he was drag racing Rotary vehicles while you my friend were in Primary school. His previous choice was a wild weber/turbo/nitrous combo, and yes he does use Microtech on other cars that he prepares.
If you insist on referring to me please do so and not snake around in the bush. This result is a credit to Paul Murray and his tremendous abilities, DO NOT CONFUSE THESE WITH YOURS!
By the way many people rate this car second in class to a car that is prepared by Dalton Autos, Guess what management system he runs!
Regards-Anthony Rodrigues.
p.s. please qoute any doubts I have had about Autronics
Paul Murray happens to be a long time and good friend of mine and he was drag racing Rotary vehicles while you my friend were in Primary school. His previous choice was a wild weber/turbo/nitrous combo, and yes he does use Microtech on other cars that he prepares.
If you insist on referring to me please do so and not snake around in the bush. This result is a credit to Paul Murray and his tremendous abilities, DO NOT CONFUSE THESE WITH YOURS!
By the way many people rate this car second in class to a car that is prepared by Dalton Autos, Guess what management system he runs!
Regards-Anthony Rodrigues.
p.s. please qoute any doubts I have had about Autronics
#10
Banned. I got OWNED!!!
Thread Starter
Originally posted by Anthony Rodrigues
. This result is a credit to Paul Murray and his tremendous abilities, DO NOT CONFUSE THESE WITH YOURS!
Regards-Anthony Rodrigues.
p.s. please qoute any doubts I have had about Autronics
. This result is a credit to Paul Murray and his tremendous abilities, DO NOT CONFUSE THESE WITH YOURS!
Regards-Anthony Rodrigues.
p.s. please qoute any doubts I have had about Autronics
You have a real problem mate.
The world does not revolve around you, so get over it.
I have enough ability to not follow people like you, so if you insist on giving me a hard time then you will get one back from me, choice is yours.
#11
Banned. I got OWNED!!!
Thread Starter
You directly called them "Autistics" remember that ?
I am sure you will
You want to send your idiot friend John Godshlax to find out about me and threaten me with **** then bring it on, I will go on telling people about what I think about items even if it does not agree with what you have to say, so as I said get over it !
The world does not rely on you or microtech despite what you may think, cause as I see it and many others can see that you can run any system you wish, I choose not to run your recomendation and MANY others do not either.
I am sure you will
You want to send your idiot friend John Godshlax to find out about me and threaten me with **** then bring it on, I will go on telling people about what I think about items even if it does not agree with what you have to say, so as I said get over it !
The world does not rely on you or microtech despite what you may think, cause as I see it and many others can see that you can run any system you wish, I choose not to run your recomendation and MANY others do not either.
#12
Banned. I got OWNED!!!
Thread Starter
Originally posted by scathcart
I just have one question. If someone else gets a higher mph using a different ECU, are you gonna come back on here and start saying, "Autotronic sucks, and here is Proof! Brand XXX ran a higher mph." ?
I just have one question. If someone else gets a higher mph using a different ECU, are you gonna come back on here and start saying, "Autotronic sucks, and here is Proof! Brand XXX ran a higher mph." ?
#13
Banned. I got OWNED!!!
Thread Starter
I will give you some tips Anthony.
Stop pushing your ecu to people who are not interested in it. No amount of BS from you or affiliated parties will make up for lack of features and specifications compared to "other" alternatives.
Stop being so arrogant towards people who do not agree with your one minded views.
Your agenda is clear to see, you promote your ECU sponsor, as this is your job, I promote facts !
You cannot handle facts ! Get over it & grow up.
Your ecu you promote is a budget alternative to MANY good units available, no amount of negative comments towards other makes or people who use other brands will ever change the facts...No matter what you say.
I am having a hard time keeping up with all the e-mail I am recieving from people all over the world telling me that they cannot believe how arrogant you are, and that it is clear to them that your only agenda is to promote your ECU, and as anyone who knows this is what your trip to the US was mainly about. You have no credability at all on this subject as your views are plainly biased towards the product you are promoting.
Stop pushing your ecu to people who are not interested in it. No amount of BS from you or affiliated parties will make up for lack of features and specifications compared to "other" alternatives.
Stop being so arrogant towards people who do not agree with your one minded views.
Your agenda is clear to see, you promote your ECU sponsor, as this is your job, I promote facts !
You cannot handle facts ! Get over it & grow up.
Your ecu you promote is a budget alternative to MANY good units available, no amount of negative comments towards other makes or people who use other brands will ever change the facts...No matter what you say.
I am having a hard time keeping up with all the e-mail I am recieving from people all over the world telling me that they cannot believe how arrogant you are, and that it is clear to them that your only agenda is to promote your ECU, and as anyone who knows this is what your trip to the US was mainly about. You have no credability at all on this subject as your views are plainly biased towards the product you are promoting.
#15
Rice,
Stop shirking the point, the only issue any flames are directed at you are not related towards Autronics, it is the B/S soapbox that you have built for yourself to preach from. Expert opinions must be qualified, yours are not! I am sick of people asking who you are? Quiet frankly I had never heard of you until this forum and your inputs are biased, unsubstantiated and definitely not based on experience. We need to establish that here in your own country you are not even considered to be a player let alone any threat of competition.
This internet is a good place for small people to create a facade of importance. Please pay more attention to your own image rather than worry about mine. Yes I do promote and sell Microtech, that is my job, as you do nothing more than sell bearings, nuts and bolts to the public I am confident that you would not be aware of the existence of business practice laws or ethics that we are governed by aswell as the many other professionals on this site.
I do not promote my sponsors product, but I will defend it from ill informed fools that constantly degrade it. The only credibility you have is on the internet so I do appreciate why you feel so threatened by me. If this reply offends you perhaps you should look for the reasons in which it is based and stop trying to attack me personally, as one day I may bring it all on!
Stop shirking the point, the only issue any flames are directed at you are not related towards Autronics, it is the B/S soapbox that you have built for yourself to preach from. Expert opinions must be qualified, yours are not! I am sick of people asking who you are? Quiet frankly I had never heard of you until this forum and your inputs are biased, unsubstantiated and definitely not based on experience. We need to establish that here in your own country you are not even considered to be a player let alone any threat of competition.
This internet is a good place for small people to create a facade of importance. Please pay more attention to your own image rather than worry about mine. Yes I do promote and sell Microtech, that is my job, as you do nothing more than sell bearings, nuts and bolts to the public I am confident that you would not be aware of the existence of business practice laws or ethics that we are governed by aswell as the many other professionals on this site.
I do not promote my sponsors product, but I will defend it from ill informed fools that constantly degrade it. The only credibility you have is on the internet so I do appreciate why you feel so threatened by me. If this reply offends you perhaps you should look for the reasons in which it is based and stop trying to attack me personally, as one day I may bring it all on!
#17
Where were all of the authorities when microtech and my associates were being dragged through the mud? Point taken! I will no longer be addressing this issue as I truly believe it is a dead horse. Can the appropriate people ensure there is no longer a need for this?If you look my opponent has had several continuous shots at me unpoliced.
Thank you in advance- Anthony Rodrigues
Thank you in advance- Anthony Rodrigues
#18
Laying Down Rotary Law
Man
this good
small list Proven Racers/shops in Aussie Land
for you yanks
-Dalton-
-Dyson-
-Maztech-
-Rotorworx-
-Pac-
-Toni Rigoli-
-RPM-
-MazFix-
-ProMaz-
-RotorMazter-
-Revs-
-Gersbach-
I wonder what ECU almost all of them use hmmmmmm
See the Point is
Every ECU out there can do it's Job
The Autronic is great computer no one is disputing that
Haltech even tho has a slow processor is also a great
computer
There a fast number of aftermarket computers
out there that we probly havent even heard off
I bet the Yanks here have not even heard of a 32Bit
Windows based computer called Hawk ****
But which one offers the most bang for the Buck?
There is where the MT's shine
and it will only get better with R&D
this good
small list Proven Racers/shops in Aussie Land
for you yanks
-Dalton-
-Dyson-
-Maztech-
-Rotorworx-
-Pac-
-Toni Rigoli-
-RPM-
-MazFix-
-ProMaz-
-RotorMazter-
-Revs-
-Gersbach-
I wonder what ECU almost all of them use hmmmmmm
See the Point is
Every ECU out there can do it's Job
The Autronic is great computer no one is disputing that
Haltech even tho has a slow processor is also a great
computer
There a fast number of aftermarket computers
out there that we probly havent even heard off
I bet the Yanks here have not even heard of a 32Bit
Windows based computer called Hawk ****
But which one offers the most bang for the Buck?
There is where the MT's shine
and it will only get better with R&D
Last edited by kabooski; 05-12-02 at 08:59 PM.
#19
Senior Member
Join Date: Jul 2001
Location: Columbus, Ohio
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Anthony Rodrigues
Rice,
Stop shirking the point, the only issue any flames are directed at you are not related towards Autronics, it is the B/S soapbox that you have built for yourself to preach from. Expert opinions must be qualified, yours are not! I am sick of people asking who you are? Quiet frankly I had never heard of you until this forum and your inputs are biased, unsubstantiated and definitely not based on experience. We need to establish that here in your own country you are not even considered to be a player let alone any threat of competition.
This internet is a good place for small people to create a facade of importance. Please pay more attention to your own image rather than worry about mine. Yes I do promote and sell Microtech, that is my job, as you do nothing more than sell bearings, nuts and bolts to the public I am confident that you would not be aware of the existence of business practice laws or ethics that we are governed by aswell as the many other professionals on this site.
I do not promote my sponsors product, but I will defend it from ill informed fools that constantly degrade it. The only credibility you have is on the internet so I do appreciate why you feel so threatened by me. If this reply offends you perhaps you should look for the reasons in which it is based and stop trying to attack me personally, as one day I may bring it all on!
Rice,
Stop shirking the point, the only issue any flames are directed at you are not related towards Autronics, it is the B/S soapbox that you have built for yourself to preach from. Expert opinions must be qualified, yours are not! I am sick of people asking who you are? Quiet frankly I had never heard of you until this forum and your inputs are biased, unsubstantiated and definitely not based on experience. We need to establish that here in your own country you are not even considered to be a player let alone any threat of competition.
This internet is a good place for small people to create a facade of importance. Please pay more attention to your own image rather than worry about mine. Yes I do promote and sell Microtech, that is my job, as you do nothing more than sell bearings, nuts and bolts to the public I am confident that you would not be aware of the existence of business practice laws or ethics that we are governed by aswell as the many other professionals on this site.
I do not promote my sponsors product, but I will defend it from ill informed fools that constantly degrade it. The only credibility you have is on the internet so I do appreciate why you feel so threatened by me. If this reply offends you perhaps you should look for the reasons in which it is based and stop trying to attack me personally, as one day I may bring it all on!
Peter has a mechanical engineering degree, and has been building, testing, R&Ding, rotary engines for 10+ years. Do you have any clue the kind of accurately predicted, reliable results he has produced time and again? Do you have clue the kind of power he has produced from the engines he as developed, researched, and tested with? No. Then why be so bold?
I don't know the situation there, but I gather that part of the reason RICE RACING is not as "mainstream" a shop, is because he HAS an honest, un-biased opinion, and because his price-to-service ratio is so low. Less quality + higher price = higher profit, if excuted correctly. Ignorant people are scared of making important decisions about what they want for their car. They want to be told re-assuringly what they should do. They don't want to have multiple decisions to make for themselves. There is nothing wrong with this of course, but to be so bold as to say he is un-qualified just makes you look that much more ignorant.
Obviously, it is wrong to say that Microtech does not have its place. Some people simply have no use or want for a highly accurate, highly programmable ECU, with many variables, and inputs. Many people just want something that will run there car, and make good peak power. These people in my opinion should learn how to setup blow-throughs and distributors, but that's just my opinion .
I'm not attacking you Anthony, I'm just pointing out that you are only fooling a few people at best with your drivel.
Peter, calm down, it's not worth the effort .
-Brian
#20
Banned. I got OWNED!!!
Thread Starter
Originally posted by Anthony Rodrigues
Rice,
Stop shirking the point, the only issue any flames are directed at you are not related towards Autronics, it is the B/S soapbox that you have built for yourself to preach from. Expert opinions must be qualified, yours are not! I am sick of people asking who you are? Quiet frankly I had never heard of you until this forum and your inputs are biased, unsubstantiated and definitely not based on experience. We need to establish that here in your own country you are not even considered to be a player let alone any threat of competition.
This internet is a good place for small people to create a facade of importance. Please pay more attention to your own image rather than worry about mine. Yes I do promote and sell Microtech, that is my job, as you do nothing more than sell bearings, nuts and bolts to the public I am confident that you would not be aware of the existence of business practice laws or ethics that we are governed by aswell as the many other professionals on this site.
I do not promote my sponsors product, but I will defend it from ill informed fools that constantly degrade it. The only credibility you have is on the internet so I do appreciate why you feel so threatened by me. If this reply offends you perhaps you should look for the reasons in which it is based and stop trying to attack me personally, as one day I may bring it all on!
Rice,
Stop shirking the point, the only issue any flames are directed at you are not related towards Autronics, it is the B/S soapbox that you have built for yourself to preach from. Expert opinions must be qualified, yours are not! I am sick of people asking who you are? Quiet frankly I had never heard of you until this forum and your inputs are biased, unsubstantiated and definitely not based on experience. We need to establish that here in your own country you are not even considered to be a player let alone any threat of competition.
This internet is a good place for small people to create a facade of importance. Please pay more attention to your own image rather than worry about mine. Yes I do promote and sell Microtech, that is my job, as you do nothing more than sell bearings, nuts and bolts to the public I am confident that you would not be aware of the existence of business practice laws or ethics that we are governed by aswell as the many other professionals on this site.
I do not promote my sponsors product, but I will defend it from ill informed fools that constantly degrade it. The only credibility you have is on the internet so I do appreciate why you feel so threatened by me. If this reply offends you perhaps you should look for the reasons in which it is based and stop trying to attack me personally, as one day I may bring it all on!
You continual need to put me down shows that you are the one who is threatened.
Your continual need to put people down because you are "arrogant" is a real bore Anthony. I do not need to waste my time talking to a looser like you mate, but I will continue to inform people and not just sell them BS just because that company are paying me to
Last edited by RICE RACING; 05-13-02 at 04:55 AM.
#21
Banned. I got OWNED!!!
Thread Starter
Originally posted by Anthony Rodrigues
Where were all of the authorities when microtech and my associates were being dragged through the mud? Point taken! I will no longer be addressing this issue as I truly believe it is a dead horse. Can the appropriate people ensure there is no longer a need for this?If you look my opponent has had several continuous shots at me unpoliced.
Thank you in advance- Anthony Rodrigues
Where were all of the authorities when microtech and my associates were being dragged through the mud? Point taken! I will no longer be addressing this issue as I truly believe it is a dead horse. Can the appropriate people ensure there is no longer a need for this?If you look my opponent has had several continuous shots at me unpoliced.
Thank you in advance- Anthony Rodrigues
You are not on here for the love of rotaries (maybe you are in your own way), you are on here for the love of yourself and in the aim of making a dollar. Everyone can see this but you cannot.
A I have said to others, if you have a problem with me then call me, but do not waste peoples time by crying when you cannot get your way, then you will earn respect, not just from me (I know you do not care about mine) but the MANY others that have none for you based on your constant reactions to me inparticular.
Think about it for a little while.
#24
Laying Down Rotary Law
relvinnian
Who are you?
your also a nobody! in the Rotary Racing scene
just as much as I am and Rice
is.
Just because he comes to this forum(Rice)
you think he is Pro?
I bet you think ReTed is a Pro too right
I'm sorry ted is knowledgeable but no way a Pro
Ohio? haha what would you know who is who eh
Plz
You can be all the "keyboard" racer you want
IT IS AT THE TRACK WHERE YOU PROVE YOUR SKILLS
as in any sport not just drag racing
There are 1000's of rotary mechanics out there in the World.
But Few Sir put there skill's to the Test
where it counts
Who are you?
your also a nobody! in the Rotary Racing scene
just as much as I am and Rice
is.
Just because he comes to this forum(Rice)
you think he is Pro?
I bet you think ReTed is a Pro too right
I'm sorry ted is knowledgeable but no way a Pro
Ohio? haha what would you know who is who eh
Plz
You can be all the "keyboard" racer you want
IT IS AT THE TRACK WHERE YOU PROVE YOUR SKILLS
as in any sport not just drag racing
There are 1000's of rotary mechanics out there in the World.
But Few Sir put there skill's to the Test
where it counts
Last edited by kabooski; 05-13-02 at 05:58 AM.
#25
Lives on the Forum
Originally posted by kabooski
I bet you think ReTed is a Pro too right
I'm sorry ted is knowledgeable but no way a Pro
I bet you think ReTed is a Pro too right
I'm sorry ted is knowledgeable but no way a Pro
-Ted