1600cc fuel rail mod
#7
Haltech E6K
Join Date: Feb 2001
Location: Northern California (USA)
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
If anyone is really interested I will sell the measurements. Everyone email me and tell me you are interested then I will let you paypal me $20 each, then I will email you back the measurements and spacing.
Yes, I made my own rail.
Rev. Dr. Jay
Yes, I made my own rail.
Rev. Dr. Jay
Trending Topics
#8
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Styk33
If anyone is really interested I will sell the measurements. Everyone email me and tell me you are interested then I will let you paypal me $20 each, then I will email you back the measurements and spacing.
Yes, I made my own rail.
Rev. Dr. Jay
If anyone is really interested I will sell the measurements. Everyone email me and tell me you are interested then I will let you paypal me $20 each, then I will email you back the measurements and spacing.
Yes, I made my own rail.
Rev. Dr. Jay
#9
Rotary Freak
iTrader: (1)
Join Date: Feb 2001
Location: Sinking Spring Pa.
Posts: 1,790
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Styk33
If anyone is really interested I will sell the measurements. Everyone email me and tell me you are interested then I will let you paypal me $20 each, then I will email you back the measurements and spacing.
Yes, I made my own rail.
Rev. Dr. Jay
If anyone is really interested I will sell the measurements. Everyone email me and tell me you are interested then I will let you paypal me $20 each, then I will email you back the measurements and spacing.
Yes, I made my own rail.
Rev. Dr. Jay
#10
Rotary Freak
Join Date: Mar 2001
Location: LA.,California USA
Posts: 1,611
Likes: 0
Received 0 Likes
on
0 Posts
That really sucks dude..I would ******' charge people for measurements if im very poor but i see that you drive a 94mazda RX-7... Screw you pal!..i aint payin' 20 bucks for some additional knowledge!..
I know there are people out there that will not charge just to tell the bore size for 1600 injectors..
I know there are people out there that will not charge just to tell the bore size for 1600 injectors..
#11
from Children of the Corn
Join Date: Feb 2001
Location: Florida
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Somehow I;m thinking that Styk33 doesn't know eighter, and is just being a joker... If so, then I say to everyone, get a sense of humor, if not then, Styk33, you're an *******
#13
Senior Member
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
i would tell you guys if i knew but i don't so i need this mesurement also
i can also see that alot of people are getting ready to install a little magic box in there car. so am I
i can also see that alot of people are getting ready to install a little magic box in there car. so am I
#14
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Dave Gibson at FC3S.org told me you doun't have to modify the fuel rail, you just have to carefully trim the plastic on the injector to fit. I dunno though, I have never even seen 1300 cc injectors.
#16
Full Member
Join Date: Mar 2001
Location: Marietta, GA
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
<-- Yes, that's my car.
Well, I'll forego the flames and defend Mr Styk33's right to try and sell something - though I'll politely decline the offer.
I figure I can take the measurements off the 1600's and back into the mod. After all, somebody had to do it first.
After I'm done, maybe I'll offer the measurements for $10 Nothing like a little competition to drive down prices 'eh?
))
L8r,
Steve C
I figure I can take the measurements off the 1600's and back into the mod. After all, somebody had to do it first.
After I'm done, maybe I'll offer the measurements for $10 Nothing like a little competition to drive down prices 'eh?
))
L8r,
Steve C
#17
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Re: <-- Yes, that's my car.
Originally posted by qwck10th
Well, I'll forego the flames and defend Mr Styk33's right to try and sell something - though I'll politely decline the offer.
I figure I can take the measurements off the 1600's and back into the mod. After all, somebody had to do it first.
After I'm done, maybe I'll offer the measurements for $10 Nothing like a little competition to drive down prices 'eh?
))
L8r,
Steve C
Well, I'll forego the flames and defend Mr Styk33's right to try and sell something - though I'll politely decline the offer.
I figure I can take the measurements off the 1600's and back into the mod. After all, somebody had to do it first.
After I'm done, maybe I'll offer the measurements for $10 Nothing like a little competition to drive down prices 'eh?
))
L8r,
Steve C
I've got a great idea. Anyone who wants some advice from anyone on the forum can pay $5 to Ryan or Jason. At least they have enough decency to ask for help and donations rather than saying "no money, no forum".
I certainly know who I won't go out of my way to help around here. This is as lame as that ***** who wanted to sell Carfax reports on the Wanted/For Sale forum. If you want to sell a "service" en masse like that, start a shop, and get a corporation going. Otherwise you are in the same boat we are, and would like a helping hand every now and then. Of course you are less likely to get one with this attitude.
I'll measure my own.
#18
20B N/A Wide Body FC3S
I'd measure mine, but they are on the car and I don't have time to pull it all apart right now, but if you order them it should be really easy to just measure them..
or
Why don't you guys just e-mail some of the places that sell the 1,600cc injectors. They should have the specs you need...
or
Why don't you guys just e-mail some of the places that sell the 1,600cc injectors. They should have the specs you need...
#20
Yellow Dragon is no more
I have no idea what is going either .... but regardless back off Jay. He has done more to help this forum than any of you that are bashing him. Even if he is serious that is his right. If you don't like the price than don't buy-simple.
#21
IRS 4 Life
iTrader: (12)
Join Date: Feb 2001
Location: Sicklerville, South Jersey!!
Posts: 2,634
Likes: 0
Received 2 Likes
on
2 Posts
if i had a micrometer id measure mine but i dont...
isnt there a spefic bit for doing fuel injectors?
i mean isnt the top a universal size
if some has a micrometer and wants to pay for shiping ill gladly measure mine for ya
isnt there a spefic bit for doing fuel injectors?
i mean isnt the top a universal size
if some has a micrometer and wants to pay for shiping ill gladly measure mine for ya
#22
Senior Member
Join Date: Aug 2001
Location: Bloomington, MN
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by spyfish007
I have no idea what is going either .... but regardless back off Jay. He has done more to help this forum than any of you that are bashing him. Even if he is serious that is his right. If you don't like the price than don't buy-simple.
I have no idea what is going either .... but regardless back off Jay. He has done more to help this forum than any of you that are bashing him. Even if he is serious that is his right. If you don't like the price than don't buy-simple.