1600cc fuel rail mod
 

anyone know the measurement when boring holes in the fuel rail foe the 1600's???

I also need this measurement.

Anyone????..i need to know this also..if i dont hear anything im sending mine to K2RD..but i really dont want to spend 150.00 for a fuel rail..

Bosche should give you the information. I highly doubt anyone will post the info on this board. Not enough people on here that are technical.

Me 2!

I figure I can do this.

Maybe ask a moderator to move the thread to Rotary Performance?

Anyone???>.

If anyone is really interested I will sell the measurements. Everyone email me and tell me you are interested then I will let you paypal me $20 each, then I will email you back the measurements and spacing.

Yes, I made my own rail.

Rev. Dr. Jay

Thanks for being a team player. :asshole:

WOW! I thought this forum was all about helping other people out, not trying to rape someone for a fucken measurement, as far as im concerned take your measurement and shove it up your ass! And do yourself a favor and find another forum with suckers that you can make money off of cause its not going to happen here.

That really sucks dude..I would fuckin' charge people for measurements if im very poor but i see that you drive a 94mazda RX-7... Screw you pal!..i aint payin' 20 bucks for some additional knowledge!..

I know there are people out there that will not charge just to tell the bore size for 1600 injectors..

Somehow I;m thinking that Styk33 doesn't know eighter, and is just being a joker... If so, then I say to everyone, get a sense of humor, if not then, Styk33, you're an asshole :D

:asshole: :D

i would tell you guys if i knew but i don't so i need this mesurement also:D
i can also see that alot of people are getting ready to install a little magic box in there car. so am I:D

Dave Gibson at FC3S.org told me you doun't have to modify the fuel rail, you just have to carefully trim the plastic on the injector to fit. I dunno though, I have never even seen 1300 cc injectors. :)

Duh, I mean 1600cc injectors... :ret:

<-- Yes, that's my car.
 

Well, I'll forego the flames and defend Mr Styk33's right to try and sell something - though I'll politely decline the offer.

I figure I can take the measurements off the 1600's and back into the mod. After all, somebody had to do it first.

After I'm done, maybe I'll offer the measurements for $10 :) Nothing like a little competition to drive down prices 'eh?

:)))

L8r,
Steve C

Re: <-- Yes, that's my car.
 

Well: U :piss: too Steve.
:bss:

I've got a great idea. Anyone who wants some advice from anyone on the forum can pay $5 to Ryan or Jason. :wtf: At least they have enough decency to ask for help and donations rather than saying "no money, no forum".

I certainly know who I won't go out of my way to help around here. This is as lame as that prick who wanted to sell Carfax reports on the Wanted/For Sale forum. If you want to sell a "service" en masse like that, start a shop, and get a corporation going. Otherwise you are in the same boat we are, and would like a helping hand every now and then. Of course you are less likely to get one with this attitude.

I'll measure my own. :asshole:

I'd measure mine, but they are on the car and I don't have time to pull it all apart right now, but if you order them it should be really easy to just measure them..

or

Why don't you guys just e-mail some of the places that sell the 1,600cc injectors. They should have the specs you need...

No responses, and big "I don't know"s n the telephone. :-|

It's evidently the world's most guarded and valuable secret. ;)

I have no idea what is going either .... but regardless back off Jay. He has done more to help this forum than any of you that are bashing him. Even if he is serious that is his right. If you don't like the price than don't buy-simple.

if i had a micrometer id measure mine but i dont...
isnt there a spefic bit for doing fuel injectors?
i mean isnt the top a universal size
if some has a micrometer and wants to pay for shiping ill gladly measure mine for ya

You can voice your opinion, and I will voice mine. Simple. :D

you guys are referring to the 1600cc injectors from K2RD right?

how bout i got a better idea, ill give you a spoon so you can eat my ass.

Mmmmmmmmmmmmmmmmmm!!!! Racerfoo ass. :yum: