Electromotive Tec 3 Latest Firmware upgrade = No Injector Fire
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Tonpah, AZ
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Tec 3 Latest Firmware upgrade = No Injector Fire
On my sand car, I upgraded my Tec 3 to the latest Firmware, i did not have the old .BIN file so I started from scratch using the wizard. the car would not start.
A local guy came out to look tune the car he could not get it running ether, what he found was that the injectors are not firing.
I have power to them, we cam manually pull them to ground, they fire.
Needless to say we are at a loss.
Prior to the upgrade the car ran fine.
Any help would be great. Tried to call Electromotive = No Answer
A local guy came out to look tune the car he could not get it running ether, what he found was that the injectors are not firing.
I have power to them, we cam manually pull them to ground, they fire.
Needless to say we are at a loss.
Prior to the upgrade the car ran fine.
Any help would be great. Tried to call Electromotive = No Answer
#2
EMI can be difficult to contact occasionally, but they are very helpfull.
try here also, lots of helpfull ppl and the EMI guys moderate it http://electromotivetec.freeforums.org/index.php
as for your issue....who knows, EFI does weird **** sometimes...i have had my share...but youll find the culprit eventually.
try here also, lots of helpfull ppl and the EMI guys moderate it http://electromotivetec.freeforums.org/index.php
as for your issue....who knows, EFI does weird **** sometimes...i have had my share...but youll find the culprit eventually.
#4
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Tonpah, AZ
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I got ahold of them Uwe was his name. I sent him my BIN, he and an engineer could not figure out why my injectors are not firing. Im sending them my ECU.
BTW I can jump them to ground and the engine fires and run a little,
BTW I can jump them to ground and the engine fires and run a little,
Thread
Thread Starter
Forum
Replies
Last Post