On my sand car, I upgraded my Tec 3 to the latest Firmware, i did not have the old .BIN file so I started from scratch using the wizard. the car would not start.
A local guy came out to look tune the car he could not get it running ether, what he found was that the injectors are not firing.

I have power to them, we cam manually pull them to ground, they fire.
Needless to say we are at a loss.

Prior to the upgrade the car ran fine.

Any help would be great. Tried to call Electromotive = No Answer

 

EMI can be difficult to contact occasionally, but they are very helpfull.
try here also, lots of helpfull ppl and the EMI guys moderate it http://electromotivetec.freeforums.org/index.php

as for your issue....who knows, EFI does weird **** sometimes...i have had my share...but youll find the culprit eventually.

 

i never had a problem to get in touch with electromotive. are you sure you are dialing the right number?

 

I got ahold of them Uwe was his name. I sent him my BIN, he and an engineer could not figure out why my injectors are not firing. Im sending them my ECU.
BTW I can jump them to ground and the engine fires and run a little,