Zenki's FC build
#1
\\TRASHTALK//
Thread Starter
Zenki's FC build
S5 large street port, extra Dowell pins(can hold 30+ Psi), Als seals, Sr motorsports aluminum flywheel with 4 puck unsprung act clutch
To4e, mark 2 wastegate, homemade divided mani, custom v mount (made myself), 2.5 intercooler piping, Isuzu npr intercooler, derale oil cooler, with -8 ss oil lines and black an fittings
KSport slide kontrolls with 10k front and 13k rear spring rates, modified spindle for fat angle (made myself), heim joint tie rod ends with chromolly adjustable shanks, solid diff mounts, and welded t2 diff
#3
\\TRASHTALK//
Thread Starter
Rebuilt the equips as well. Now the rears are 18x12.5 -17 and the fronts are 18x10.5 -39... so the dmax 30mm fenders are under construction for fitment.
#4
\\TRASHTALK//
Thread Starter
I just got a painless 8 circuit, so I'm installing that... running a Haltech e6k with 1000's all around and ss fuel lines with -6 an. Cosmo 3 rotor fuel pump. Gonna be rockin C16 or Q16 on startup
Trending Topics
#11
\\TRASHTALK//
Thread Starter
The tabs for the radiator i made outta 18 gauge steel. the bottom plate has a nut welded on the inside for easy install.
I welded it myself and it holds my weight, i can even jump up and down on it.
Gonna make a downpipe too.
I welded it myself and it holds my weight, i can even jump up and down on it.
Gonna make a downpipe too.
#20
\\TRASHTALK//
Thread Starter
#21
Full Member
Join Date: Jun 2011
Location: Pittsburgh, PA
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Car looks awesome. That angle is insane what kind of tie rods are u running? Or just the chromolly heim joint ends on stock tie rods?
Last edited by KryptoniteFC3S; 06-24-11 at 11:43 AM.
#24
\\TRASHTALK//
Thread Starter
Nah dude... Soeedway motors
They're 5/8ths shank and stud. Its pretty beefy. I had a weak *** set bend on me, luckily I spotted it before It broke
They're 5/8ths shank and stud. Its pretty beefy. I had a weak *** set bend on me, luckily I spotted it before It broke
#25
\\TRASHTALK//
Thread Starter
Got another set of barrels. These are 137mm making the fronts 11J's or the spare 12J's 12.5...
I waited 2 months for the 137mm barels and they have a different bolt pattern... Dude fucked my order... So now I gotta send em back and wait for anotber pair. Might order another set so Ill have rebuilt spares too
The following users liked this post:
dejdar85 (07-21-17)