who has tha lowest FC???
#428
I break Diff mounts
iTrader: (1)
Yay low FC's.
My Ksports will make my car sit frame rail if I max low. I'm almost maxed at going up to get my current height.
I think I need 18's so I can get flush while holding the same height. I already snap the front bumper sides zipties going up my driveway.
My Ksports will make my car sit frame rail if I max low. I'm almost maxed at going up to get my current height.
I think I need 18's so I can get flush while holding the same height. I already snap the front bumper sides zipties going up my driveway.
#444
so this thread inspired me, i picked up a set of used tein flex for 775 and put em on tonight, what are you all doing for the front, i cant get much more than like 2in drop before my tire hit the coil with the camber plate maxed out, i want to go lower in the front but i cant seem to? whats the remedy?
#445
can i just take the collar all the way down to get lower instead of just threading the shock body down? i tried a 20mm space but i need diff lug nuts that r shorter to use them
#446
Always Slideways
iTrader: (1)
Join Date: Dec 2008
Location: Tacoma
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
what about messing with the preload? my silkroads will set the stock front bumper on the ground without removing collars or touching preload but the back is already bottomed out inside the peice that bolts to the control arm. like how much quicker is it going to wear out the shock if i lower it an inch and a half or two? i just want to tuck tire hard again
#449
right now i didnt touch the spring sag in the rear since it was sitting lower than the front, in the front i saged the spring all the way and the car is sittin level at this point and drives amazing. i will be takin pics in a little bit and when i do i will post some up