who has tha lowest FC???
#330
yuppp stock metal. was going to use wide front fenders but didnt like the look so i went back to stock.
yeah, in the rear is rolled and pulled hardcore. the right rear is perfect, i towed it to the shop down the road and didnt touch once buttt the right side was a different story lol bunch of shredded rubber on the quarter
yeah, in the rear is rolled and pulled hardcore. the right rear is perfect, i towed it to the shop down the road and didnt touch once buttt the right side was a different story lol bunch of shredded rubber on the quarter
#331
Full Member
Join Date: Nov 2007
Location: Auckland, New Zealand
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
10's kinda too big for the front especially on stock metal. They will have no clearance for turning and youll have **** all lock. Id look into getting 17x9 for the front with 215/40
#332
i just finished lowering my fc as far as i could with out having my exhaust scraped going in a straight line! lol i took a pix cuz it came out crappy as **** i cant wait till tomorrow to take some pix =]
#334
lol im gonna try to make it as good as possible with what i have. i love the stance it has now. super mean. im not trying to be the lowest. just low and flush. not so much hella flush. im still gonna do a couple things here an there with the suspension tho
#335
Tango Down
iTrader: (3)
Yeah, for now. Tire rack fucked me by not having my tires in stock that i wanted. They're like "substitute or refund" Refund that ****.
No venders had the 17/18 stagger i wanted in stock and i blew a substantial amount of money on good buckets, a clutch, hydro lines/slaves/masters and **** like that. And i bought a roof wing and ganadors. Towards the end of summer, i'll buy something but i haven't decided. It'll be a surprise. Ask dk, was i NOT pissed the **** off because i couldn't get my wheels? I was ready to choke a bitch. And the nogs who wanted to buy my 16's couldn't come through with 2 ******* steelies.....
I'm making excuses. Shitty ones at that but it's my story and i'm sticking to it. Trust me, i was supposed to have had 17/18 stagger on the car as i type this. Just didn't play out that way and money burns a hole in my pocket.
#337
RX7-Factory
iTrader: (8)
my car is high as **** still, and i'm down to one collar all around...
i need some stance's or PBM's. my ebay coilovers have no camber plates... if i didnt have the stock upper mounts it would go low..
still needs tons of spacings.
mopping dori's looks gay as **** when you're sunken...
#340
Tango Down
iTrader: (3)
Going from rotas to THOSE (abc exclusive? Fitment plz?) is a huge step up and looks like you got your engine back in too!
#342
RX7-Factory
iTrader: (8)
You're right. My **** is TERRIBLE. Internet sarcasm, all-in-good-fun **** is hard to detect. Expensive kickass wheels=good. Aero on a car with **** wheels=terrible and not Ivan the Terrible, terrible. Stepping in dogshit in converse walking to the front door to pick up your hot date terrible.
Going from rotas to THOSE (abc exclusive? Fitment plz?) is a huge step up and looks like you got your engine back in too!
Going from rotas to THOSE (abc exclusive? Fitment plz?) is a huge step up and looks like you got your engine back in too!
the other motor went in 8 runs, i sold that, re-NA swapped the car, and ended up selling it, when i traded my 92 3000gt vr4 on ksports for this turboII.
i'm just giving you ****. with out us bagging on dudes, no one would step up their fitment game.
#344
RX7-Factory
iTrader: (8)
the ports were too big, and kept eating off the side seals from what my old engine builder told me. when the last one blew my friend bought it. there was just one stuck corner seal.
he said it could have been due to a fraudulent template because there were a few dudes who had motors built by the same guy, and they all blew. i cant drop names but the shop was highly reputable, so it wasnt due to lack of knowledge.
it sucks. i lost about $3k all in all, but this new chassis being stock (with its current setup) is plenty enough for right now. if i make it to the nationals, i'll rebuild the motor and maybe get a bigger turbo, but for now i cant worry about it. just need to drive.
he said it could have been due to a fraudulent template because there were a few dudes who had motors built by the same guy, and they all blew. i cant drop names but the shop was highly reputable, so it wasnt due to lack of knowledge.
it sucks. i lost about $3k all in all, but this new chassis being stock (with its current setup) is plenty enough for right now. if i make it to the nationals, i'll rebuild the motor and maybe get a bigger turbo, but for now i cant worry about it. just need to drive.
#345
Tango Down
iTrader: (3)
Overporting an engine is something that the builder either rushed/didn't give a **** about or was just plain stupid with.....
The side seal ends and corner seals MUST be riding on the iron at all times, not dipping into the intake port. That definately sucks and sorry you ended up being out $3k. That's alot of money and work down the drain......
The side seal ends and corner seals MUST be riding on the iron at all times, not dipping into the intake port. That definately sucks and sorry you ended up being out $3k. That's alot of money and work down the drain......
#346
RX7-Factory
iTrader: (8)
Overporting an engine is something that the builder either rushed/didn't give a **** about or was just plain stupid with.....
The side seal ends and corner seals MUST be riding on the iron at all times, not dipping into the intake port. That definately sucks and sorry you ended up being out $3k. That's alot of money and work down the drain......
The side seal ends and corner seals MUST be riding on the iron at all times, not dipping into the intake port. That definately sucks and sorry you ended up being out $3k. That's alot of money and work down the drain......
my setup now, gave me faith again, so i'm sticking with it...
#350
http://www.youtube.com/watch?v=PlJiS...layer_embedded
http://www.youtube.com/watch?v=OxUQp...layer_embedded
not mine but ***** low and obviously still street rips
http://www.youtube.com/watch?v=OxUQp...layer_embedded
not mine but ***** low and obviously still street rips