who has tha lowest FC???
 

Im bored as fuck.... but this should be fun.

measure the height from the 21mm nut on your rear subframe to the ground.

im at 4 1/4 in. in my DD and drift machine. bumpsteer sucks but it looks gangsta.

Not rockin the VS in tha rear but you get an ideahttp://www.desertimports.com/events/...erdrift082.jpg

dont have any good shots...
http://c1.ac-images.myspacecdn.com/i...a7995d994c.jpg

I'm pretty sure drftwerks has the lowest FC on this board. That shit is RETARDED low.

thats a nice drop. do you have coilovers?

My question is which coilovers can go the lowest before you have to droop the spring? My rears are maxed out with like 2 inches of spring droop and it feels like ass already. The lower collars on the fronts are seized so I need to get them rebuilt anyway.

nice.cool.thread.

I vote for SlideAlliance.

His FC kills it.

DRIFTWERKS IS the lowest.. aero is cheater fiberglass low.. subframe/frame rail low is what counts!

Oh damn my bad, my bad.

LOWEST and street driven ALOT?

more pics please

Dont even know how low she is. What I do know is that I scrape tires a lot, bump steer is brutal and I run a decent camber up front

http://photos-h.ak.fbcdn.net/hphotos..._4130990_n.jpg

yup DD and track car.... Anyone care to measure????

this white one is NICE^^^^

i love it.

is there any other way to have it?

Here's a pic from the front, I DD her everyday for the past 3 months so far. The nose of my shoe just fits underneath it. (she's sitting on cut springs and blown struts, by previous owner) Front bumper finally got banged up from a pot hole here in my town and now im repairing it. I live in a very hilly area with lots of dips, there of plenty of places i can't take my car.


http://i42.tinypic.com/2ev7p02.jpg

lollll .. man I wish my teins could go as low as driftwerks.. teins suck ass...
if I could, i would drift stock body slammed as fuck, tucking 19s in the rear lol

I can go not lower than this without going to 45 series tires......

I've burnt the paint off my front fenders from tire rub.....

http://i125.photobucket.com/albums/p...shotcamber.jpg

http://i125.photobucket.com/albums/p...otdistance.jpg

Obviously it sits lower than pictured without the scrap wood under the tires. That's the only way i could get a jack under it though.

Front crossmember sits about 2.5" off the ground. Will be going lower once i get new tires and think of a clever way to correct the angle of the lower control arms.

ps: Rear camber is now close to zero now. These are old pics before i put my mazdatrix camber arm in.

Wow, You fucked your rear quarters.

17x10 +25 with a 235. no rubs

http://i328.photobucket.com/albums/l...g?t=1246410159

0 offset with a 225.

http://i328.photobucket.com/albums/l...g?t=1246410240


17x9.5 with a 215 +13 offset. no roll or pull... sits directly on tha tire and wouldnt lower tha extra two inches or so...

it should sit about where tha tire is stretched tha most or right above the lip of tha rim

http://i328.photobucket.com/albums/l...g?t=1246410390


POST SUM PICS MUTHAFUCKAZ... and measure from tha 21mm bolt on your rear subframe to tha ground. i wanna see who SITS tha lowest and still DD's and drifts

Also if i threw an aggresive Origin kit on my FC i would be on tha ground... im concerned with tha measurement from tha rear 21mm bolt on tha subframe to ground clearance.

The, not tha.

yes i know...

Yeah, i did. Now i need 25mm spacers. :lol:

Should have used newspaper but it was hard to get info on anything but the "bat method". Nobody wanted to help until AFTER i did it. :dunno:


No big deal. I just dont want to shell out the $80 for ichiba spacers.....

Origin Stylish/Stream no such thing as aggressive.
Bumper will sit high, on all Origin bumpers the front RAKES up like crazy.

You should see mine.........hahah I cut mine all the way up to the first body line.....folded, welded, grinded then primered over it. Then I put some nive 40mm overs on it.