Steering knuckle mod "moar angle"
#251
Garage Life
iTrader: (8)
its strange..I only have tierod 7mm spacers and stock tierods.. I think this is around what a maxed out rack should be with stock knuckles.. It doesnt even touch the sway bar or lower arm. Because of the fatty 30mm spacer on a 17x10 +12 wheel with 235/45s
it feels looks like its alot already lol. But I still want more, I always hit lock at the track and dreamt of more! someday salvation will come!
blissss
it feels looks like its alot already lol. But I still want more, I always hit lock at the track and dreamt of more! someday salvation will come!
blissss
#252
Full Member
Join Date: Feb 2009
Location: Bournemouth, UK
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Haha yeah probably.. I've not even looked.
I bought the car 2 weeks ago and have spend over 3k on parts just to do with suspension, angle, interior saftey, huge weld in cage, body kit etc. I have 3 weeks left to build the car to full competition spec.
the tyres/wheels left on her atm are the ones i bought the car with.. I have the following to go on..
17x10 et35 on rear.. probably a 235/40/17
17x9.5 et 12 on the front probably a 225/40 or 224/xx
but I need to get the spacers off my old 240sx which is being broken..
that was last seasons ride.
I should have the front fenders on so i can use my spacers etc and see what i need to bash the crap out of for more lock.
I also had my first practice day in the car and the first day on the new engine in fact. She survived!! which is main thing, but I had some miiigghty loud bangs from the back and also was hitting the front arches..
more hammering i think.
#253
Garage Life
iTrader: (8)
Haha yeah probably.. I've not even looked.
I bought the car 2 weeks ago and have spend over 3k on parts just to do with suspension, angle, interior saftey, huge weld in cage, body kit etc. I have 3 weeks left to build the car to full competition spec.
the tyres/wheels left on her atm are the ones i bought the car with.. I have the following to go on..
17x10 et35 on rear.. probably a 235/40/17
17x9.5 et 12 on the front probably a 225/40 or 224/xx
but I need to get the spacers off my old 240sx which is being broken..
that was last seasons ride.
I should have the front fenders on so i can use my spacers etc and see what i need to bash the crap out of for more lock.
I also had my first practice day in the car and the first day on the new engine in fact. She survived!! which is main thing, but I had some miiigghty loud bangs from the back and also was hitting the front arches..
more hammering i think.
I bought the car 2 weeks ago and have spend over 3k on parts just to do with suspension, angle, interior saftey, huge weld in cage, body kit etc. I have 3 weeks left to build the car to full competition spec.
the tyres/wheels left on her atm are the ones i bought the car with.. I have the following to go on..
17x10 et35 on rear.. probably a 235/40/17
17x9.5 et 12 on the front probably a 225/40 or 224/xx
but I need to get the spacers off my old 240sx which is being broken..
that was last seasons ride.
I should have the front fenders on so i can use my spacers etc and see what i need to bash the crap out of for more lock.
I also had my first practice day in the car and the first day on the new engine in fact. She survived!! which is main thing, but I had some miiigghty loud bangs from the back and also was hitting the front arches..
more hammering i think.
#254
Chicago
iTrader: (4)
Haha yeah probably.. I've not even looked.
I bought the car 2 weeks ago and have spend over 3k on parts just to do with suspension, angle, interior saftey, huge weld in cage, body kit etc. I have 3 weeks left to build the car to full competition spec.
the tyres/wheels left on her atm are the ones i bought the car with.. I have the following to go on..
17x10 et35 on rear.. probably a 235/40/17
17x9.5 et 12 on the front probably a 225/40 or 224/xx
but I need to get the spacers off my old 240sx which is being broken..
that was last seasons ride.
I should have the front fenders on so i can use my spacers etc and see what i need to bash the crap out of for more lock.
I also had my first practice day in the car and the first day on the new engine in fact. She survived!! which is main thing, but I had some miiigghty loud bangs from the back and also was hitting the front arches..
more hammering i think.
I bought the car 2 weeks ago and have spend over 3k on parts just to do with suspension, angle, interior saftey, huge weld in cage, body kit etc. I have 3 weeks left to build the car to full competition spec.
the tyres/wheels left on her atm are the ones i bought the car with.. I have the following to go on..
17x10 et35 on rear.. probably a 235/40/17
17x9.5 et 12 on the front probably a 225/40 or 224/xx
but I need to get the spacers off my old 240sx which is being broken..
that was last seasons ride.
I should have the front fenders on so i can use my spacers etc and see what i need to bash the crap out of for more lock.
I also had my first practice day in the car and the first day on the new engine in fact. She survived!! which is main thing, but I had some miiigghty loud bangs from the back and also was hitting the front arches..
more hammering i think.
"Yoshio Factory"???
#255
Full Member
Join Date: Feb 2009
Location: Bournemouth, UK
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
haha yeah.. twas a bit of fun and comedy as it was my rookie season with few sponsors etc.
Kumakubo and tanaka came over to a round in their team orange subarus and loved the car, were taking pictures etc lol
Yeah It could be diff mounts, I havent looked.. but got a snazzy pic of the lock:
and yeah.. I kept it.
Kumakubo and tanaka came over to a round in their team orange subarus and loved the car, were taking pictures etc lol
Yeah It could be diff mounts, I havent looked.. but got a snazzy pic of the lock:
and yeah.. I kept it.
#257
Rotary Enthusiast
Join Date: Feb 2005
Location: Norway
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
like not throwing low offset rims and huuge spacer to keep it away from the swaybars?
I know it looks stuupid with spacers etc. I found out that insted of pushing the wheel out oyu can make a spacer for the S4 arm. It wont work on s5 since it doesnt got a screws for the end-link(name please?)
I know it looks stuupid with spacers etc. I found out that insted of pushing the wheel out oyu can make a spacer for the S4 arm. It wont work on s5 since it doesnt got a screws for the end-link(name please?)
#258
Tango Down
iTrader: (3)
Eye candy joint with megan racing next to stock garbagola so you can grasp the concept of "max angle from THE RACK".
This picture doesn't do the kit justice b/c i have an absurd amount of toe in i have to zero out. I dunno what happened. I lined everything up with the stock rods, set my camber as far negative as it would go (that might have done it) on my camber plates and have retarded toe!
I'll fix it some time this week. I'm off the next 3 days.
Meh, i fix. fix. It can go more than pictured but not much more. Gotta fix the toe.
This picture doesn't do the kit justice b/c i have an absurd amount of toe in i have to zero out. I dunno what happened. I lined everything up with the stock rods, set my camber as far negative as it would go (that might have done it) on my camber plates and have retarded toe!
I'll fix it some time this week. I'm off the next 3 days.
Meh, i fix. fix. It can go more than pictured but not much more. Gotta fix the toe.
#260
Banned. I got OWNED!!!
iTrader: (11)
need opinions on how to handle this problem.
modified knuckles, m-trix spacers and spherical joints. 8.5x17 -6 wheels. **** clears lca but is running into the lower subframe near the rear. its pretty stout metal right there and doesnt move well with a hammer so i was thinking that i would need to cut it but i dont like how close the subframe bolts will be after i remove that much material.. anyone else have similar problems? what did you do?
modified knuckles, m-trix spacers and spherical joints. 8.5x17 -6 wheels. **** clears lca but is running into the lower subframe near the rear. its pretty stout metal right there and doesnt move well with a hammer so i was thinking that i would need to cut it but i dont like how close the subframe bolts will be after i remove that much material.. anyone else have similar problems? what did you do?
#264
Senior Member
iTrader: (3)
Join Date: Mar 2008
Location: nyc
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
does anyone know of a supplier that sells angle kits for a manual rack?? i know i can put a spacer but i want a tie rod and end setup... ps keep your comment on how gay manual steering is to yourself lol
#265
ziptied.com hates you
Join Date: May 2008
Location: Himeji, JPN / Orange County, Ca
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
#268
Rotary Freak
iTrader: (19)
No there is nothing out there, for a couple of reasons, one they use to different tie rods (one ps sized the other manual specific) Two, the manual tie rod side of the rack can only gain about 1.5mm more travel, while the other side is about 10mm so you will have different steering angles per side, best option is to find a ps rack.
#269
Garage Life
iTrader: (8)
this will not fail. 3 layers of welds straight across the lateral side.. Almost 2xthicker than the stock knuckle, and alot shorter.. Damnit Iwanted to install these today and drift with em at the track tnite, but I lost my front lugnut key, ****.. I guess Il get to try em out next week! The pictures are progress pics... the first pics is first layer of weld, then last is third..
#270
Garage Life
iTrader: (8)
stock..
I took a huge bodyshop sledge hammer to the end link hole ring and smacked it a few times, and damn the welds are immortal, its strong. I wanted to make sure while driving on the freeway the knuckles wont fail on me, my life depends on this ! lol cant wait to put em on...
#273
ziptied.com hates you
Join Date: May 2008
Location: Himeji, JPN / Orange County, Ca
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
if you have steering spacers on, i'd take them out. knuckles + spacers = rub city most of the time. especially with the wack tire sizes you run lol...<3
#274
Garage Life
iTrader: (8)
i was installing them this friday, and ran into a problem, the stock tierod end link hits the brake rotor because its kind of fat? lol. Looks like Il need the mazdatrix angle kit to work with my knuckles. so this will be postponed until I have $$ to get the angle kit from mazdatrixx
#275
Garage Life
iTrader: (8)
yeah before welding I had the dust shield on it to double check. The knuckle doesnt hit the brake rotor, its just the stock tierod ends are really wide. I just didnt put the tierod in to check before welding, its just hitting alil. With the mazdatrix setup it should for sure fit. so yeah pattieennceee...
I modded a spare pair of knuckles I had, so what in my car is still stock.
I modded a spare pair of knuckles I had, so what in my car is still stock.