adoresrx7

Black base, purple flakes. <3

NoPistons!

iTrader: (3)

Since when did you start drifting, hypertek?

Tyler [S5 FC]

My lame Cadillac Pearl White, can't wait to do my two tone paint job this winter

Hypertek

iTrader: (3)

i did a few events in 04-05 and street stuff years ago. *Open Diff S13 before people got into welded diffs* no pics cuz my s13 looked like **** at the time. sadly no one was really into taking pics so i dont have much proof. I do enjoy canyon runs though
youtube.com/ watch?v=aBSFSe1tVzk
youtube.com/ watch?v=oBzhsJLC0t4

This is the only area on this forum where lowered cars and kits dont get hated on lol

Zenki FC3S

Custom Tri coat i made. ***** sick!!!!!

FC3S.USD

iTrader: (2)

So many nice paint jobs, makes me want to redo the hand brush like job my car has.

10thslydur

iTrader: (3)

Yea true but it's got to be in good Taste some **** I've seen is jus puke

dkwasherexd

iTrader: (8)

so what kinda spray guns do you guys like? I have a devillbliss.. I used to have anes iwata, damn i loved that gun..

10thslydur

iTrader: (3)

Sata jet 3000's only for me

10thslydur

iTrader: (3)

damn it ****** thiefs nothing worse

paganizondadude

iTrader: (1)

How about this color on my FC? Canteen green from the Nissan Titan...

http://www.titantalk.com/forums/atta...hp7anuxipm.jpg

budgetslashcry

probably one of the nices forestish green ive seen ^

paganizondadude

iTrader: (1)

Take a look at the color in person. I saw it and said... My FC will be that color. lol. Its a sexy *** color.

Battle Cat

iTrader: (78)

I need some guidance, and help getting my fd ready for paint..

I want to basically prep the car my self(sand it down and primer it.)

what grit sand paper and or tools will i need to do this right..

im doing the whole fd inside and out..

need to get figure this **** out asap..

thanks

NoPistons!

iTrader: (3)

I like it. Def start saving for some baller wheels to pull it all together.

I have no room to talk (yet....i vow to change wheels atleast once a year until i get some **** i'm happy with) but i agree that baller wheels>mediocre budget wheels>stock when you have a paint that pops like that.

dkwasherexd

iTrader: (8)

do body work first.

Grind the metal, hammer it as straight as you can, then fill, then block it even.

Then to prep for paint you just sand the whole car by hand starting 320 dry then 400 wet to 800 wet to 1000 wet..

Zenki FC3S

i would hit it with 600 wet... keep it wet cuz it cuts down more. use a hard block to keep from getting finger impressions, and do an X pattern going over each pass.

some primer's you dont sand, so if you get it smooth then prime and just shoot over it.

Zenki FC3S

In the booth

D Walker

iTrader: (1)

I met a couple guys from here http://www.autobody101.com/forums/ at SEMA a few years ago and they seem to have a good group of both professional and "at-home" painters and have a fair amount of info on equipment, processes, etc from begining stripping down to the final buff/wax. Unlike other paint/body "forums" or sites its not "or at least wasnt) just a marketting tool for someone selling something.

Battle Cat

iTrader: (78)

well basically right now, I have to still buy the bn kit, origin fenders(all four corners). other than that i have everything else.. the body its self is straight.(a few dings here and there..)

do i need like bondo and **** to get those little door dings out?


awesome, ima have to go buy some sand paper in the next couple of days..

thanks ill keep that in mind

thanks you haz pm.

thanks for the link appreciate it.

turboIIrotary

iTrader: (9)

read the tech sheet for the paint you will use you will get ton of advice on what to do but the manufacturer knows best personally i would never sand up to 1000 grit because i have never seen a tech sheet call for such a high grit. i just recently used some dupont primer and it said to wet sand with 400 grit then apply top coat.



some tips- clear coat and single stage paints are super sticky i suggest wearing cloths that cover up all your skin or you will have stiff eye lashes and arm hair. don't use bondo branded products they really do suck and takes forever to sand down.

budgetslashcry

Just took a pic of mine outside finally.. was messing with HDR but thats what the paint color looks like in the sun I like it

IMG_8132_0_1_tonemappedresized.jpg?

Might just have to keep the wheels that color, matches perfectly with carbon in the sun..

Gonna lower it 1/2 ionch in the rear and an inch in the front and add a little camber I think..

Zenki FC3S

dude

lower your car

budgetslashcry

I know, we still have to replace some suspension pieces to replace. We will do it then

Battle Cat

iTrader: (78)

moar pics