Still flooding
Thread Starter
Joined: Nov 2005
Posts: 868
Likes: 0
From: Ottawa, Canada
My engine is still flooding. It's not as bad as before,but now the leading plugs get wet with fuel (there not soaked AND no i'm giving it gas when i start it). So i'm guessing it's those two seals and o-ring that are causing the problem. Any advice on further steps ?
Well, if it's only fuel and not coolant, then you might wanna make sure your getting spark.
I'd come check it out tonight after work but I have no clue where you live and I'm also not gonna take the bus
You know your getting fuel so...
Take the leading plug wires off, use some known working plugs and ground them to the engine or chassis. Then get a friend to turn the engine over and see if you get a strong spark.
I'd come check it out tonight after work but I have no clue where you live and I'm also not gonna take the bus

You know your getting fuel so...
Take the leading plug wires off, use some known working plugs and ground them to the engine or chassis. Then get a friend to turn the engine over and see if you get a strong spark.
Last edited by RXciting; Dec 1, 2005 at 04:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
FbFuninthesun
New Member RX-7 Technical
3
Oct 6, 2015 08:03 AM
PinkRacer
2nd Generation Specific (1986-1992)
43
Oct 1, 2015 09:13 AM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
Sep 11, 2015 03:29 PM



