REDNECK Engine Pull....YeeeHaaaaaww!
Thread Starter
Joined: Jun 2001
Posts: 5,781
Likes: 2
From: Arkham Asylum
REDNECK Engine Pull....YeeeHaaaaaww!
Well, if Yeti and his brother The Cr0_Mag can do it, anyone can. Not hard to tell which one of these boys is on a daily steroid regimen.
Some fine Redneck Rotax Mechanix going on there....:
Some fine Redneck Rotax Mechanix going on there....:
Last edited by eViLRotor; Jun 5, 2005 at 05:14 PM.
GrapefruitRacing?
Joined: Apr 2003
Posts: 2,155
Likes: 0
From: PartSource
****** A! Good job Jay and Ian. Way to get that Rotax out. Now see if you can stick an LS1 in the same way :P. J/K
Get that thing rebuilt. Ian Help your brother out with some parts! I know you have what he needs.. and no i'm not talking about under the sheets
. Help my TTFC brother out!
Get that thing rebuilt. Ian Help your brother out with some parts! I know you have what he needs.. and no i'm not talking about under the sheets
. Help my TTFC brother out!
Trending Topics
nothing wrong with a little radiation!!! or a lot, only makes for a cheaper life with no kids, and unprotected sex.
not to mention that Ian can't lift anything over 50lbs with out getting a SCR.
not to mention that Ian can't lift anything over 50lbs with out getting a SCR.
Last edited by Nismo Convert86; Jun 5, 2005 at 07:10 PM.
callin' tokyo
Joined: Dec 2002
Posts: 1,353
Likes: 0
From: Windsor, Ontario
Come on now people, use the right tool for the job.... That stick is much too short!
A longer stick would have made it possible to get underneath the load and heave it up using your legs.
I don't know if this should be filed as a genuine entrepreneurship make-do attitude or a typical management attitude of 'just work harder'.
j/k
A longer stick would have made it possible to get underneath the load and heave it up using your legs.
I don't know if this should be filed as a genuine entrepreneurship make-do attitude or a typical management attitude of 'just work harder'.
j/k
Brother of Yeti!!!!!!
Joined: Dec 2004
Posts: 466
Likes: 0
From: SCABOROUGH
ha ha h a
[QUOTE=Dom]Come on now people, use the right tool for the job.... That stick is much too short!
A longer stick would have made it possible to get underneath the load and heave it up using your legs.
I don't know if this should be filed as a genuine entrepreneurship make-do attitude or a typical management attitude of 'just work harder'.
guys guys guys here's the deal we spent most of the day searchimg for a hoist cheap enough worthy of 1 pull no luck so we got fed up and relied on some good old redneck intuition and hey it was heavy as hell but we got her out lmao i tore my back and i think ian tore a few blood vesels, But the stick was actually a pole we swiped from the neighbor as well as the nylon rope he he i hope he doesn't notice his shed was raided just goes to show you you can do anything as long as you put your mind into it
A longer stick would have made it possible to get underneath the load and heave it up using your legs.
I don't know if this should be filed as a genuine entrepreneurship make-do attitude or a typical management attitude of 'just work harder'.
guys guys guys here's the deal we spent most of the day searchimg for a hoist cheap enough worthy of 1 pull no luck so we got fed up and relied on some good old redneck intuition and hey it was heavy as hell but we got her out lmao i tore my back and i think ian tore a few blood vesels, But the stick was actually a pole we swiped from the neighbor as well as the nylon rope he he i hope he doesn't notice his shed was raided just goes to show you you can do anything as long as you put your mind into it
EvilRotor's Brat Sister
Joined: Oct 2003
Posts: 528
Likes: 0
From: Ontario
Now I'm curious to see what the boys discover when they pull the engine apart.... Either a) A-Spec doesn't know how to rebuild an engine if it blows again a few thousand kilometers after or b) nopistonsfc lied once again and the engine was never fully rebuilt. Hmmmm....
Brother of Yeti!!!!!!
Joined: Dec 2004
Posts: 466
Likes: 0
From: SCABOROUGH
That was fun
Look at the little handle I had to hold. Jay had it easy, he had the T-bar handle. Leaning over the car and trying to pick it up was stupid hard. We have it on video. Its great for a laugh. I was trying to lift it and laugh at the same time. Funny expressions!
Gonna have to find a lift to put the motor back in though.
Is anybody computer literate! My computer at home is fobar since I'm running a new computer and trying to set it up? I have no idea on how to set this things up for multiple users and I forgot my password for the forum. No rx7 forum for me or msn!
Ian
Look at the little handle I had to hold. Jay had it easy, he had the T-bar handle. Leaning over the car and trying to pick it up was stupid hard. We have it on video. Its great for a laugh. I was trying to lift it and laugh at the same time. Funny expressions!
Gonna have to find a lift to put the motor back in though.
Is anybody computer literate! My computer at home is fobar since I'm running a new computer and trying to set it up? I have no idea on how to set this things up for multiple users and I forgot my password for the forum. No rx7 forum for me or msn!
Ian
Thread Starter
Joined: Jun 2001
Posts: 5,781
Likes: 2
From: Arkham Asylum
LOL!
Yeti Wah Kenobi is a useless Jedi....
For multiple users, just go to Control Panel/User Accounts depending on which OS you are running.
Yeti Wah Kenobi is a useless Jedi....
For multiple users, just go to Control Panel/User Accounts depending on which OS you are running.
Last edited by eViLRotor; Jun 6, 2005 at 10:13 AM. Reason: Useless hairy Yeti
Thread Starter
Joined: Jun 2001
Posts: 5,781
Likes: 2
From: Arkham Asylum
Originally Posted by nik
I'm very impressed you guys were able to do this, and not break anything.
When is the teardown scheduled?
When is the teardown scheduled?
